|
Title: How do you remove this clip? Post by: MrBellMan on April 01, 2010, 01:19:22 AM I need to change out a reel basket and I'm not sure how to remove the center clip.
Suggestions please? Thank you! Rob Title: Re: How do you remove this clip? Post by: Bettor Slots on April 01, 2010, 01:22:11 AM Take a flat head screw driver or the butt end of and Xacto and bend up a couple of the tines. Don't over force and break them off. When read to reassemble take some pliers and put it back into shape before putting it back onto the hub.
Title: Re: How do you remove this clip? Post by: PWRSTROKE on April 01, 2010, 01:36:05 AM When you go to reassemble the basket/clip--Take the clip and put on a solid surface and flatten it with a hammer etc.. This puts the "prongs" back will they grip and is the way they come factory. Takes much less time than pliers -Though pliers wil work as well but the flatness of the retainer being re-established enables all the prongs to secure to the hub shaft. Works every time--Try it. B.
Title: Re: How do you remove this clip? Post by: MrBellMan on April 01, 2010, 01:54:11 AM Perfect! They are easy to bend for sure, but making them flat (hammering) makes the stick just like new!
Thanks for the help! K+ Rob Title: Re: How do you remove this clip? Post by: Brianzz on April 01, 2010, 02:01:03 AM Twist too much and you'll be looking for days for it as it shoots across the room at light speed
Title: Re: How do you remove this clip? Post by: MrBellMan on April 01, 2010, 02:04:42 AM As someone that works with a lot of pinball machines, I can tell you I have lost MANY clips in my days! :30- :30- :30-
Rob Title: Re: How do you remove this clip? Post by: PWRSTROKE on April 01, 2010, 02:10:34 AM These same clips are sold at your local hardware/automotive store. I deal with them daily (the clips). No big deal a far as your initial question as they are re-useable --Unless they pop out of there and are MIA as stated earlier. B.
|