|
Title: Bally E2000 The Hopper won't shut off Post by: Amachanic on April 07, 2010, 07:43:56 PM I just picked up a Bally E2000 Model number E1213-27. It's an old Bally Gold slot machine. It has 2 problems I have to work on. First one is that when you power on the machine the hopper starts running and doesn't shut off. I put this hopper in a different machine, only to have the same problem. Is the hopper control board bad? I can run all the different test thought this hopper board while its running. My second problem is error code 71. I have checked the reel reader boards in different machine and there all good. Is my problem in the I/o board or the reel reader board located on the front of the reel assembly?
Title: Re: Bally E2000 The Hopper won't shut off Post by: Amachanic on April 10, 2010, 11:14:41 PM I found this problem was a bad Hopper Board. Looked like it has a burnt trace on the board? I replaced the hopper board with a different one and the hopper is working now. When I picked up the machine it had a broken fuse holder in the back wall, and the hopper fuse was blow-en. Now all I have to do is try to figure out the error code 71 on this machine. The reel reader boards are all good, tested in another machine. Anyone have any ideas?
Title: Re: Bally E2000 The Hopper won't shut off Post by: FOXSSLOTS1 on April 11, 2010, 03:41:23 PM 71 is door open last. is the machine tilting?
|