|
Title: PE+ dip switch settings needed Post by: bkbargins4u on April 07, 2010, 11:44:33 PM Hi,
I am looking for a copy of the dip switch settings for a PE+ Thanks! Title: Re: PE+ dip switch settings needed Post by: lemans1969 on April 08, 2010, 02:26:34 PM There is nothing in the manual for the dipswitch settings. all the machines I have ever built, they are all in the off position I do believe. I would have to double check the board. April
Title: Re: PE+ dip switch settings needed Post by: bkbargins4u on April 09, 2010, 09:46:28 PM Mine are all currently off too but I wanted to see what my options were, I will have to experiment with the switches and I will report my findings. I accidentally discovered a "double up" option on my Fortune II that wasn't on my dip switch setting sheet. Thanks April!
Title: Re: PE+ dip switch settings needed Post by: knagl on April 09, 2010, 10:23:41 PM The Fortune II and even the PE (non-plus) used dip switches to adjust some settings -- I'm not sure that they do anything on the PE+, but if you do find anything I know I'd be interested.
|