|
Title: WBA 23 acceptor head Post by: kcire_racsis on April 17, 2010, 06:36:49 AM :37- :37- Hello!! im a newbie tech.. i would like to ask for an advice about how to repair WBA 23's acceptor head.... you know.. WBA is expensive so we need to be practical and resolve this by repairing.. we have 10 accptor head that are not working.. Please help me on how to troubleshoot this.. any reply will be very much appreciated.. Thanks!!!
Title: Re: WBA 23 acceptor head Post by: StatFreak on April 17, 2010, 08:41:32 AM kcire_racsis, it might help our experts if you describe the problem that you are having in greater detail, including the exact symptoms or issues, the protocol ID of your WBAs, and the make and model of machine(s) in which they are installed, etc.
Welcome to NLG :88- StatFreak :31- :nlg- Global Moderator Title: Re: WBA 23 acceptor head Post by: kcire_racsis on April 17, 2010, 09:51:06 AM :88- :3Thanks Sir StatFreak! ID0303v136-20 ... this are WBAs used in our weike 1.8... the problem is that, upon testing of the WBA with the acceptor head.. it doesn't initialize... we already cleaned allt these heads but the same problem occurs.. i tried to get one good acceptor head and tried to swap the upper sensors... the other one (the said good acceptor head) initializes but after a while, the motor rotates again and the LED indicator lits up with 4 frickers... and the other acceptor does not work having the upper sensor of the good one.. do you think the lower sensor causes the problem of not initializing???? thanks!!!! :131- :131- :131- :131- :131-
Title: Re: WBA 23 acceptor head Post by: StatFreak on April 18, 2010, 07:24:16 AM Are you sure that it's ID0303? I have no info on that protocol. :103-
What is a Weike 1.8? |