New Life Games Tech Forums

Bill Validators and Currency acceptors => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: polybius on April 24, 2010, 06:27:27 PM



Title: WBA 11 on but spits out bills??
Post by: polybius on April 24, 2010, 06:27:27 PM
We got the S+ working with the SP1271 working, used the SET90 and got the DBV working?  it boots, takes in the bills, holds them for a second and spits them back out.
What did we miss on the credit limit settings etc? 


Title: Re: WBA 11 on but spits out bills??
Post by: polybius on April 24, 2010, 08:13:40 PM
Put the set chip back in, and checked the settings, seems o.k.  is there a setting in the self test I am missing?


Title: Re: WBA 11 on but spits out bills??
Post by: polybius on April 24, 2010, 08:46:28 PM
Problem fixed, found a dip switch out of place!!!    :3-


Title: Re: WBA 11 on but spits out bills??
Post by: Buzz on April 24, 2010, 08:53:09 PM
Put the set chip back in, and checked the settings, seems o.k.  is there a setting in the self test I am missing?

Did you get the two PSRs I emailed you?


Title: Re: WBA 11 on but spits out bills??
Post by: Magicslots on April 24, 2010, 11:15:56 PM
Yes, Thanks for the PSR's Buzz, they were a great help.   :3-  :3-
We could not get the the SP709 to work with either the Set 026 or the 90,
so we swapped it out for the 1271.
Thanks again  :244-  :244-  :244-


Title: Re: WBA 11 on but spits out bills??
Post by: polybius on April 25, 2010, 02:18:57 AM
Magicslots rules. Spent a few hours on his Saturday, and got it working. I think I need a power supply, and a transformer for the DD. I hate to buy a board, and chips, and the voltage be too high, What do you think?


Title: Re: WBA 11 on but spits out bills??
Post by: gadiel on July 15, 2010, 02:51:12 AM
I have same problem but on a WBA 12 and 13 . Dip switches are fine one take the bills and spits them and the other one takes the tip of the bill and spits it out. Anyhelp guys


Title: Re: WBA 11 on but spits out bills??
Post by: IFFV68 on July 15, 2010, 06:08:57 PM
I have a S+ power supply on the Board if you need one.
I don't have any use for it.
Got it from a member in Oregon.


Title: Re: WBA 11 on but spits out bills??
Post by: polybius on July 22, 2010, 05:55:44 PM
Sure, I would love to try it. How much do you want?