|
Title: transporting a game king 275 + miles. Post by: joshmail on May 04, 2010, 01:07:26 AM Hi all,
I have got my eyes on a Game king in Las Vegas I live in Phoenix and was wondering what I should be looking for before I buy said Game King. Also what you think about it holding up to a 275+ mile road trip :138- in the back of my truck? THX. Title: Re: transporting a game king 275 + miles. Post by: CaptainHappy on May 04, 2010, 02:33:37 AM Hi all, I have got my eyes on a Game king in Las Vegas I live in Phoenix and was wondering what I should be looking for before I buy said Game King. Also what you think about it holding up to a 275+ mile road trip :138- in the back of my truck? THX. I always take the monitor out and pack it safely before I move a video machine.... Just a suggestion. CaptainHappy :95- :nlg- ADMIN Title: Re: transporting a game king 275 + miles. Post by: Bettor Slots on May 04, 2010, 03:21:51 AM I might suggest you also remove the MPU board. I have often found the daughter card vibrated loose. I have even seen simms and proms vibrated out of their sockets.....just takes a decent pot hole and things go flying. Finally, it's not a bad idea to remove the top box round fluorescent bulb (assuming this is a round top). Those are clipped in there pretty tight with these 3 clips at 120 degrees to one another and it does not take much of a bump for those to shatter. Good luck...
Jim Title: Re: transporting a game king 275 + miles. Post by: ashyron on May 04, 2010, 10:04:13 AM I also remove the hopper (if installed) and the bill acceptor too. Everything else should be OK.
I always take the monitor out and pack it safely before I move a video machine.... Just a suggestion. |