|
Title: IGT problems....I want to pull my hair out Post by: delma on May 04, 2010, 11:52:51 PM I'm looking for some IGT help from any folks out there. I have an IGT slant top 3609 with a 17 inch touch screen monitor. The following are the problems:
The monitor shows clear picture but has no response to touch screen. Try to do a ram clear and is now stuck in the key chip menu with various faults due to not being able to navigate the settings via touch screen. Note: this touch screen came out of another game that was working. The touch screen that was NOT working is now on another machine and works fine. Help! Delma in Dallas Title: Re: IGT problems....I want to pull my hair out Post by: Tilt on May 05, 2010, 12:08:53 AM Hi Delma,
Try removing the bill validator and see if the touchscreen works with it out. What error messages are you getting? Title: Re: IGT problems....I want to pull my hair out Post by: PWRSTROKE on May 05, 2010, 12:11:53 AM I am NO pro on this platform BUT havent't we seen this before--- :103-. B.
Title: Re: IGT problems....I want to pull my hair out Post by: Bettor Slots on May 05, 2010, 01:32:55 AM Two things to try.
First, calibrate the touch screen by turning the jackpot key one time (assuming you are still stuck in the menu), if the calibration screen does not come up turn the jackpot key one more time. Follow the on-screen "calibration" instructions that come up. Second, try swapping the MPU board from the working machine. Title: Re: IGT problems....I want to pull my hair out Post by: stayouttadabunker on May 05, 2010, 02:22:06 AM Delma, is that the Frog Princesses game that has the problem?
Title: Re: IGT problems....I want to pull my hair out Post by: slotsteve on May 05, 2010, 10:22:39 AM Make sure you HAVE a ground on plug also try reseating chip on touch srceen board
Title: Re: IGT problems....I want to pull my hair out Post by: Forrhouse on May 05, 2010, 02:07:39 PM Hi Delma. Could be a cabling issue. Try switching the monitor cables with the working machine.
E~ Title: Re: IGT problems....I want to pull my hair out Post by: TechSavy on May 05, 2010, 05:22:45 PM Delma,
I believe you are in texas. Just bring it by our shop and we will diagnose ur problem Title: Re: IGT problems....I want to pull my hair out Post by: kforeman on May 10, 2010, 05:59:48 PM i have zero experience with the 3609 board but if i were stuck in keychip mode with no t/s response i would pull the mpu back out and swap the ram chips with each other, install game software and clear through all the errors until the game was back up. then i would diagnose the t/s problem with the help of the diagnostics in the operator menu.
you mentioned that you used a known good t/s but how about the t/s control board? good luck Title: Re: IGT problems....I want to pull my hair out Post by: a69mopar on May 10, 2010, 09:57:10 PM Bad mpu boards can cause the touch screen issue.
w Title: Re: IGT problems....I want to pull my hair out Post by: a69mopar on November 22, 2011, 09:58:16 PM I'm looking for some IGT help from any folks out there. I have an IGT slant top 3609 with a 17 inch touch screen monitor. The following are the problems: The monitor shows clear picture but has no response to touch screen. Try to do a ram clear and is now stuck in the key chip menu with various faults due to not being able to navigate the settings via touch screen. Note: this touch screen came out of another game that was working. The touch screen that was NOT working is now on another machine and works fine. Help! Delma in Dallas dont panic over a touchscreen problem...you're having a simple problem and all you need to do is take one of your hands and keep it on the door of the machine or any metal part thereof and use your other hand to touch the screen to set your options...this works great as you use your body as a ground connection....works for me all the time and strangely ONLY on IGT'S Thanks, Wayne Title: Re: IGT problems....I want to pull my hair out Post by: slotsteve on November 22, 2011, 10:43:10 PM :3-
|