|
Title: Seeburg Q100 Help needed.... Post by: klorvinborno on May 09, 2010, 05:02:39 PM I realized this is a longshot, but you guys have always helped me with slots in the past so here goes
I picked up a Seeburg Q100 Jukebox and I've got a sticking Safety Plunger clutch. I've got the selector out of the jukebox and the record tray removed so I'm staring at the back of the selector. Attached is a picture of the clutch removed, but I'm not sure on the process to remove the assembly. There's actually the beginning of the service manual on this site, but I need the details on how to remove the clutch in order to clean and oil it. By any chance does anyone have the instructions? I believe most of the Seeburg assemblies are the same from the 1950's to 60's or later. Title: Re: Seeburg Q100 Help needed.... Post by: slotsteve on May 09, 2010, 06:11:13 PM spray the hell out of it b4 you start takiing it a part degreaser should work
Title: Re: Seeburg Q100 Help needed.... Post by: georgetwo922 on December 31, 2010, 03:34:41 PM I just finished with a customer's seeburg, and yes, just spray it with a good contact cleaner and use some light oil, if you've removed the magazine, it should be easy to get to. Also, be very careful putting the magazone back as it is easy to get the selector pins out of whack when replacing it.
Title: Re: Seeburg Q100 Help needed.... Post by: Ken Layton on February 16, 2011, 04:18:10 PM Ron Rich's Seeburg Mechanism Guide book should help. He hangs out at the jukebox forum of www.phonoland.com
|