|
Title: PSR for SP 733 Post by: B-52BadByron on May 24, 2010, 01:52:53 PM I need the PSR for a SP733 chip. Any help would be appreciated.
Title: Re: PSR for SP 733 Post by: stayouttadabunker on May 24, 2010, 02:42:35 PM Sure! What problem are you have with your machine? :128-
Title: Re: PSR for SP 733 Post by: B-52BadByron on May 24, 2010, 02:50:30 PM whenever credits are built up and I hit the cash/credit button a bell dings quickly contineously and won't payout. I have to use the reset key on the right side to reset the machine. What do I need to change to fix the preoblem.
Title: Re: PSR for SP 733 Post by: stayouttadabunker on May 24, 2010, 03:26:45 PM There are people answering this question in your other thread.
Title: Re: PSR for SP 733 Post by: brichter on May 24, 2010, 03:33:56 PM Yup, and looks like he's going to need clear/set chips so he'll need the PSR for the settings... :89- :89- :89-
Title: Re: PSR for SP 733 Post by: B-52BadByron on May 24, 2010, 04:44:45 PM So does anyone have the PSR for a SP 733?
Title: Re: PSR for SP 733 Post by: knagl on May 24, 2010, 05:05:32 PM :172-
Start with the settings in the PSR before jumping to RAM clearing and whatnot. I don't think that your machine needs a clear -- I think it just needs its hopper limits set to what you want. Title: Re: PSR for SP 733 Post by: brichter on May 24, 2010, 05:14:19 PM His machine isn't respecting the hopper lin=mits which are set by the DIP switches, IIRC.
The DIP switches 1 and 2 are set to OFF on his machine, which should equal a payout limit of 300 coins. Title: Re: PSR for SP 733 Post by: B-52BadByron on May 24, 2010, 05:26:03 PM Thanks for the PSR. I will check to see what needs to be done. I have used the clear chip before without problems. Just trying to see if there is an easy fix.
|