|
Title: bally 6000 safe ram clear Post by: gteatr6 on June 18, 2010, 03:34:44 PM I am working on a mini royal, I believe it is a bally 6000. Anyway, I got a code 81 and changed the battery out. Now I get a code 87f. How do I clear the safe ram? Oh, I am a newbie on this particular machine.
Title: Re: bally 6000 safe ram clear Post by: Ron (r273) on June 18, 2010, 04:04:38 PM I don't know anything about Bally 6000 but here is some info on u-tube.
http://www.youtube.com/watch?v=fJ-yRz4AnYc&feature=player_embedded (http://www.youtube.com/watch?v=fJ-yRz4AnYc&feature=player_embedded) Ron(r273) Title: Re: bally 6000 safe ram clear Post by: a69mopar on June 18, 2010, 04:13:03 PM You need to perform a complete clear follow the video and hold the test and pseudo coin buttons as yo start.
Thanks, Wayne Title: Re: bally 6000 safe ram clear Post by: gteatr6 on June 18, 2010, 05:25:53 PM I don't have the clear chips. Where can I get them?
Title: Re: bally 6000 safe ram clear Post by: a69mopar on June 19, 2010, 01:36:27 AM Jim at Blueridge has them. Here's a link to his profile where his contact info is. http://newlifegames.net/nlg/index.php?action=profile;u=76 (http://newlifegames.net/nlg/index.php?action=profile;u=76)
Thanks, Wayne Title: Re: bally 6000 safe ram clear Post by: stayouttadabunker on July 21, 2010, 05:49:08 PM On the Bally 6000 before performing a "clear", does the DS1 need to 8th dipswitch "ON" or "OFF"?
Also, the jumpers JW12 and JW20 on my board is soldered together. For the life of me, I cannot get the clear chips to go into the "Clear" sequence as shown in your video. I have "8100" and every bulb flashing at a very high rate and never get to the "CH P" or "CL P". ADD>> I "read" the RamClear chips and these are my results: U28 ST M27C2001 checksum:0xC047 U43 ST M27C2001 checksum:0x8901 Are these ^^^ correct? Title: Re: bally 6000 safe ram clear Post by: a69mopar on July 21, 2010, 06:49:01 PM Hi Mark,
The dip switch doesn't matter with newer chips. Change your battery then try the clear. 81 (00) = low battery. Thanks, Wayne Title: Re: bally 6000 safe ram clear Post by: stayouttadabunker on July 21, 2010, 06:51:30 PM okay....Thank you very much monsieur! :109-
I will try this in the AM...I gotta hit my T-time before the storm comes in! lol ADD>> wow!...I clipped off the positive side of the battery and put a multimeter on it. I got a reading of .018 VDC...lol Total junk! I will solder in a new one in a coupla minutes. Good call Mopar! Title: Re: bally 6000 safe ram clear Post by: stayouttadabunker on July 21, 2010, 07:15:10 PM Awessome!!!
The "Clear" went perfectly!!! Now I just gotta get the coin mech to accept...that's another tale...lol Takes bills fine though! Thanks Mopar!!! :131- Title: Re: bally 6000 safe ram clear Post by: stormrider on July 21, 2010, 08:27:07 PM :136-
Title: Re: bally 6000 safe ram clear Post by: golflover on July 21, 2010, 08:44:33 PM Awessome!!! The "Clear" went perfectly!!! Now I just gotta get the coin mech to accept...that's another tale...lol BuThanks Mopar!!! :131 Gee Bunker need any help with the coin mech?? :103- :208- I've had lots of practice :89- But in retrospec you should probably talk with Buzz :89- |