|
Title: Bally 1000 - Mapping J connector to reel Mech connector pins Post by: Jeff99 on June 28, 2010, 03:20:15 PM I need to perform a continuity test on my wiring from the I/O board via the J connectors to the reel mech Molex connectors. I can't seem to find any info for these connections so I can ensure I'm looking at the right pin to connector pairing.
Appreciate any help. Jeff Title: Re: Bally 1000 - Mapping J connector to reel Mech connector pins Post by: MarkInAz on July 30, 2010, 10:03:26 PM Hi Jeff,
Sorry for the slow reply. Do you still need help with this. You'll find I/O and Molex "wire number" info in the Bally Series E 1980 - 1986 manual that's floating around out there on the web. Mark Title: Re: Bally 1000 - Mapping J connector to reel Mech connector pins Post by: Jeff99 on August 01, 2010, 04:01:57 AM Mark,
Thanks for the response. I figured it out and made a too that connects to the connector so it's easy to trace things. Do you know the URL where I could get the manual? Thanks again, Jeff |