|
Title: Sigma uv1700 17" monitor schematics. Post by: dragster73 on July 01, 2010, 01:28:01 PM I am in need of schematics.
The monitor i have is ticking (Switching power supply) The caps have been replaced. I found a approximately 2 watt resistor that had cold solder joints. So bad it was loose. After soldering it back in the resistor now starts to burn and the supply is still ticking. I need to find what is shorted however without schematics this will probably be impossible. The Monitor has a sticker on the metal frame. "Princeton" Model #uv1700 Part #110702 Can anyone help with this? I have monitor repair experience. Thanks in advance Jerry CLause Gameroom Service. Title: Re: Sigma uv1700 17" monitor schematics. Post by: TZtech on July 01, 2010, 02:02:13 PM Not sure which model the machines uses but try here - http://slot-tech.com/interesting_stuff/princeton/
|