|
Title: Bally PS6000 code 70 Post by: e2ekielus on July 16, 2010, 09:15:19 PM Ok, I did all kinds of searches and did not find a solution to my prob. I have a Bally 6000 that has the 70 reel error code. I cannot get the reels to stop spinninig and finish that roll. I know there is a way to clear the code and resume where it left off because i had this prob before, however im not sure what i did the last time i fixed it.
Title: Re: Bally PS6000 code 70 Post by: a69mopar on July 17, 2010, 01:09:28 AM most times that people open the door while the reels are spinning and get the 70 code, it will clear when you close the door. Sometimes you have to close the door, then open the door and close it again. If those don't work, open the door turn the reset key then close the door. Worst case scenerio saferam clear, but I doubt you'll need it.
w Title: Re: Bally PS6000 code 70 Post by: StatFreak on July 17, 2010, 01:36:32 AM ..but you don't have to worry about that, since Wayne has pointed out that you don't have an S2000! :127- :47- :100- :208- :208- :208- Title: Re: Bally PS6000 code 70 Post by: a69mopar on July 17, 2010, 01:51:06 AM One thing to remember about the S2000 is that it stacks error codes, so sometimes you have to open and close the door several times to clear all of the codes. Have another one SF, you're in the Bally section :96- ... Sorry, I just had to, you don't give me many opportunities.. :88-W Title: Re: Bally PS6000 code 70 Post by: StatFreak on July 17, 2010, 02:03:26 AM One thing to remember about the S2000 is that it stacks error codes, so sometimes you have to open and close the door several times to clear all of the codes. Have another one SF, you're in the Bally section :96- ... Sorry, I just had to, you don't give me many opportunities.. :88-W :208- :208- :208- I saw S6000 and thought S2000. :127- :30- :30- Does that mean that I'm tired? :96- :72- :72- I didn't even catch the obvious saferam clear reference "clue". :25- |