Title: Bally ProSlot Reel Strips Are Peeling Post by: golflover on July 17, 2010, 09:40:22 PM Hi All.. I was looking at the IGT thread and saw that they were having problems with the S2000 reel strips not being able to be cleaned without fading. I have a problem with my proslot the center reel 7's on my Diamond Line Blazing 7's are peeling. Not anywhere else on the reel, just the 7's. When the payline stops on a 7 you can see inside the reel cage. Is anyone elsehaving this problem? I have never cleaned the reels, nor have I had to at this time. What is everyone cleaning the strips with? Steve told me how to find the reel strip numbers, hopefully I can find a vendor for them.
Title: Re: Bally ProSlot Reel Strips Are Peeling Post by: Buzz on July 17, 2010, 09:55:45 PM golflover Post some strip numbers and I will see what I have.
Title: Re: Bally ProSlot Reel Strips Are Peeling Post by: golflover on July 20, 2010, 01:23:03 PM golflover Post some strip numbers and I will see what I have. Morning Buzz: Sorry for the delay, work keeps getting in the way!!! I looked at the machine: the following is listed on stickers on the bottom of the reel cages. Reel 1 SMI 6892 Reel 2 SMI 8209 Reel 3 SMI 6892 Tape # 1750 Tape # 1498 Tape # 1752 Position 1 Position 2 Position 3 Hope this makes sense to you. Seems strange that the center tape is a much different set of numbers. I would have thought, maybe wrongly so that the numbers would all be of the same sequence or group? Am still leanring. just the center reel is peeling at this point. This is a Diamond Line Blazing 7's 2 coin, 3 reel proslot. Thanks again! Title: Re: Bally ProSlot Reel Strips Are Peeling Post by: stayouttadabunker on July 20, 2010, 01:43:54 PM I think Reel 2 SMI 6892 should be Tape # 1751?
Title: Re: Bally ProSlot Reel Strips Are Peeling Post by: golflover on July 20, 2010, 02:24:36 PM I think Reel 2 SMI 6892 should be Tape # 1751? Yes Bunker I would have thought that too. I just copied what was written on the sticker on the bottom of the reel cage. It just confirms that this was a mumbo jumbo of different parts, which led to the confusion in the beginning about this machine. |