|
Title: MSVerify Comm Error Post by: bowlingalley11 on July 20, 2010, 01:34:55 PM Hello All.
I am a novice to the slot machine world so any help I can get would be greatly appreciated. I just bought my first IGT S2000 Reel Touch (Bucks Ahoy) and when I attempt to turn on the machine, the machine tries to boot up and I get an "MSVerify: Comm Error" message on lower left display. The monitor doesn't appear to me on? Any help would be greatly appreciated. I was working well for a few days and now I can't get past this error. Thank you for your time. Eric Title: Re: MSVerify Comm Error Post by: brichter on July 20, 2010, 02:07:35 PM Set the J1 jumper on the motherrboard of the top game (near the edge of the board, next to the RAM SIMMs) and watch the boot process if there is one. The game in the top runs off a 486 PC motherboard, so the BIOS messages, etc., may seem familiar.
If you don't see anything, the top game may not be booting up due to power issues, it's fed from the power supply in the bottom of the cabinet. |