New Life Games Tech Forums

Greets again everyone!

We just picked up a number of Monte Carlo machines and there's a ton of additional optioning codes under the 11d menu that aren't covered in the regular S6000, Monte Carlo, or Progressive manuals...    :103-

The mains are: S6M1DS7C008-00 ST
The games are: E872311X-05 2244 ST

Does anyone have a full list of codes they could post or email?

There's a virtual beer in it for ya!

Thanks in advance
-Karsten

More Monte Carlo's to get running - does anyone have info on these machines??

Karsten,
I don't have any info on Monte Carlo machines but if I did, I'd send you my copies in a heartbeat.
As a machine dealer - won't the big shot companies offer you
technical documentation should you request for it?
Just wondering.... :129-

 :208-   :72-   :97-

They don't give us access precisely because we are a dealer!  Why help us eat into their potential sales?

These Monte Carlo's are driving me nuts! 

lol...I understand your point of view!
Doesn't really make sense though - they don't sell machines to
homeowners in legal states though? Do they?
I thought they only deal with casinos.
Which of course brings up another question>>>
Do any of these big shot companies sell machines to a legal state homeowner?

WWG,

We are more than pleased to share info that we have (that is what this site is all about) but if you do get the codes before someone else on this site comes up with them please remember that part of being a good member here is giving back and we would like very much that you post your pool of knowledge to benefit others also.

Knowledge has no value if not shared.

I'll answer this later, on my cell now.
Thanks,
Wayne

I agree completely!  As usual, anything I come across related to a topic I'm on gets posted.

What I know so far:

According to the Monte Carlo manual (it's really just an addendum with a bunch of schematics and a couple paragraphs of DIP switch and Optioning code settings); SW4 & SW6 on DS1 must be set to off.  This goes against suggestions already posted to NLG by others with Monte Carlo's.

The DS positions were as follows (this is how they were set coming from the casino):

DS1 - 11010101
DS2 - 00101011
DS3 - 11111111

Here's the list of unknown optioning codes (also casino settings):

79H - 0
79L - 0
82 - 1
83 - 1
84 - 1
85 - 1
86 - 1
87 - 1
88 - 1
96 - 1
12 - 0
90 - 0
91 - 0
95 - 0
73 - 3
76 - 0
61 - 2
81 - 0
74 - 0
77A - 1.48
77B - 1.31
77C - 1.4E
8 - 0
5 - 0
20 - 1
23 - 0
92 - 0
98 - 1
99 - 0
69 - 0
19H - 0
19L - 0
17 - 0
24 - 0
30H - 9999
30L - 0

Side note:  Oddly enough, some of the boards from the casino still had the U24 chip in them as well...

Hi Karsten,
   There are several different Monte Carlo machines, some single spin, some multi spin, which do you have?  The single spin can be set up to print tickets and work fantastically.  These are the ones the Monte section of the manual is for.  The multi spin machines require newer mains and have some different settings.

Thanks,
Wayne

I've got one of the single spin, the rest are multi.  The mains are current, so no issues there (2008 versions).

There are a few other codes I missed in the list as well - but you get the idea.  There's a ton of new codes on the new mains and no documentation on what the hell they mean!

your dip switch settings (as listed) should be fine, most of the settings you listed are not required.  
important settings if progressive
02 = 4(sometimes 5)
07 = 1
78LO = 1
06 = 0255

no chip in u24 if progressive.  casino likely swapped boards.



79H - 0  VLC ID
79L - 0
82 - 1  machine controll functionality
83 - 1 aft/eft functionality
84 - 1  progressive
85 - 1  legacy bonusing
86 - 1  validation (tito)
87 - 1  tournament
88 - 1  sas busy timing
96 - 1 filtering of sas polls
12 - 0  win lockup credit release
90 - 0  host remote jackpot release
91 - 0  host queue
95 - 0  voucher denom mismatch  
73 - 3  voucher validation level, set to 0
76 - 0  voucher  enable= 0 both voucher and info receipts = 1
61 - 2  machine directed payment with 2 being printer only, 1 is hopper only and 3 is both
81 - 0   0 for coinless or 1 for coin
74 - 0   ticket expiration
77A - 1.48  to program what is printed on the tickets
77B - 1.31  to program what is printed on the tickets
77C - 1.4E  to program what is printed on the tickets
8 - 0  Credit Snap (quick add to credit meter when set to 1)
5 - 0  even hand pay win lock up
20 - 1  extra coin applied to next game (0 for pay from hopper)
23 - 0  grips host
92 - 0  sas bonusing
98 - 1  primary host (1 = 5.01 bonusing only) 0 =  none
99 - 0  secondary host
69 - 0 0= cc16 etc, 1 = mc16 etc
19H - 0 asset number
19L - 0  asset number
17 - 0   set sas version  0= 5.01, 1=6.01
24 - 0  0= don't print promotional vouchers, 1 = print promo vouchers
30H - 9999
30L - 0
Thanks,
Wayne  (my computer is down, had to use my wifes)

Wayne,
You still get the K+ that I just gave you for being so helpful all of the time! Even if you had the nerve to use your wife's computer!  :208- :208-

CH :95-

i'm back on my own computer and filled in the rest now.

Thanks,
Wayne

Thanks Wayne. :131- I saved this thread for the day that I own one of these. :71-


Stat :31-

Hoarder!  :200- :72-

We oughta just send each other our hard drives....would be a lot easier...lol

Good stuff on the codes!  Thanks a ton!!  Beerz and Karma all around  :3-

I have a lot of paper docs that I go through now and then.  I find something new every time.

If you need any deeper info on a specific setting, please let me know.
 I have been ill for 2 weeks and am on antibiotics now, so hopefully I have more patience to type longer.  It helps that my computer is not sick anymore

Your computer probably got you sick in the first place!!!  :200- :5- :200- :96-

Maybe you need to wear rubber gloves when you type on it? :72-

CH :95-

RESULTS:

Aside from one machine that's having an odd BV issue, I've been able to get all our MC's setup and running as standalone coin/ticket machines!

Here's the rundown -

SWITCHES, et alii:

• DS1 - 11110111
• DS2 - 00101011
• DS3 - 11111111
• U24 PROM removed
• Main - S6M4DS7C0008-00 ST (2008)
• Main - S6M1DS7C0008-00 ST (2008)
• CHAM II+ - ID#1 (see my old Bally post on the Cham II+ for wiring connection setup)
  
• SafeRAM - S6S4000CLR07-01
• SafeRAM - S6S1000CLR07

OPTIONING: (coin only, no printer)

27 - 1
26 - 1
9 - 6
10 - 11
11 - 1
2 - 4
7 - 1
18 - 0
80 - 0
1 - 0
47 - 1
38 - 0
48 - 6
50H - 0
50L - 1
54 - 0
56 - 800
62 - 0
78H - 0
78L - 1
79H - 0
79L - 0
82 - 1
83 - 1
84 - 1
85 - 1
86 - 1
87 - 1
88 - 1
96 - 1
4 - 0
51 - 800
3 - 0
70 - 0
71 - 0
72 - 0
58 - 800
6 - 0
12 - 0
90 - 0
91 - 0
95 - 0
73 - 0
76 - 0
61 - 3
81 - 1
74 - 0
64 - 0
67 - 8000
14 - 0
77A,B,C - n/a
8 - 0
5 - 0
20 - 1
68 - 1
23 - 0
92 - 0
98 - 0
99 - 0
69 - 0
19H - 0
19L - 0
17 - 0
24 - 0
30H - 0
30L - 0

Have fun!!  :3-

Heya Wayne - could you elaborate on the following settings (available settings & description for each) when you get a chance?  Or, if anyone has a more recent Bally cheat sheet (mine's from 2004), would it be possible to email or fax a copy?


Thanks all!