|
Title: Pot of gold no sound Post by: knowledge_1 on July 30, 2010, 06:37:48 AM Hello,
I changed the mother board on my POG from 400 to 510, but when i change it i had no sound. Could some one tell me how to turn on the sound. :103- Thanks knowledge_1 Title: Re: Pot of gold no sound Post by: ROCKET on July 30, 2010, 09:58:20 AM Hello, I changed the mother board on my POG from 400 to 510, but when i change it i had no sound. Could some one tell me how to turn on the sound. :103- Thanks knowledge_1 you mean you changed the software from 400 to 510 ?? on the T-340 BOARD I asume ?? you did not swap out a complete board did you ?? in both cases as I gave above its adjusted by a potentiometer =volume screw on the board thats it !! just turn the screw and the volume will go up o down if you swapped boards ?? you may have a >>bad pot<< volume screw on the 510 board you instaled !! ===================================================================== this is rulling out the obvious that a speaker wire is off ?? or you have neg wire on pos spot on speaker visa versa Title: Re: Pot of gold no sound Post by: knowledge_1 on July 30, 2010, 11:17:09 AM Hello ROCKET,
I have two POG machines that i swap out the complete board, POG 1 have a 400 board and POG 2 have a 510 board and the sound work on both machines, but when i took the 510 board from POG 2 and place it in POG 1 the sound did not work. :103- Thanks knowledge_1 Title: Re: Pot of gold no sound Post by: ROCKET on July 30, 2010, 11:46:46 AM Hello ROCKET, I have two POG machines that i swap out the complete board, POG 1 have a 400 board and POG 2 have a 510 board and the sound work on both machines, but when i took the 510 board from POG 2 and place it in POG 1 the sound did not work. :103- Thanks knowledge_1 The only thing I can say is keep the boards in the machines that they work in ?? & check the EDGE CONNECTOR in the machine with no sound - -if the boards have sound in there original machines you know the sound pots are good --if you pulled one board and placed it in another machine and have no sound ??check the edge connector they do get worn along wth the >>>golden fingers <<<on the boards themselves .. Title: Re: Pot of gold no sound Post by: knowledge_1 on July 30, 2010, 02:29:41 PM Ok,
thanks ROCKET Title: Re: Pot of gold no sound Post by: ROCKET on July 30, 2010, 02:34:39 PM Ok, thanks ROCKET if you have real pot of gold machines in steel chrome cabinets ?? shoot us some pictures please .. I dont think we have a real pot of gold picture on file ?? other than the home made -home used -one i had tjkeller post pictures of way back .. no problem on the help drop me a email on profile if you need to talk . R. Title: Re: Pot of gold no sound Post by: caspur on September 19, 2010, 07:59:00 PM Ok, thanks ROCKET if you have real pot of gold machines in steel chrome cabinets ?? shoot us some pictures please .. I dont think we have a real pot of gold picture on file ?? other than the home made -home used -one i had tjkeller post pictures of way back .. no problem on the help drop me a email on profile if you need to talk . R. I have some Pot of Gold machines in the chrome casino cabinets I'll take some pics tomorrow and post them up ;) |