|
Title: Setting up a Progressive Cham II+ on a Bally 6000? Post by: morspeed on August 07, 2010, 04:51:35 PM I am trying to set up a cham II on a Bally 6000 Monte Carlo. Everything was already there but I only see one relay chip on backplane board in Jackpot one. Is that all I need and what settings am I missing in the menu and I must be missing a setting on the cham II+ as well. Any help would be appreciated. I see in groups on the cham SA0 Sa1 and so on. I did not notice just Plain SA like I put on the IGTs. Anybody know??
Thanks, Tommy Title: Re: Setting up a Progressive Cham II+ on a Bally 6000? Post by: Ron (r273) on August 07, 2010, 07:14:27 PM I am trying to set up a cham II on a Bally 6000 Monte Carlo. Everything was already there but I only see one relay chip on backplane board in Jackpot one. Is that all I need and what settings am I missing in the menu and I must be missing a setting on the cham II+ as well. Any help would be appreciated. I see in groups on the cham SA0 Sa1 and so on. I did not notice just Plain SA like I put on the IGTs. Anybody know??Thanks, Tommy I just ran across this the other day when I updated my CHAMII+ chip. I think this is on the newer chip, so I set it at SA0 and it worked, SA1 did not. Ron (r273) Title: Re: Setting up a Progressive Cham II+ on a Bally 6000? Post by: morspeed on August 07, 2010, 07:39:18 PM Thanks Ron, I will check this out. Do you also happen to know where the Bally needs to be set. I am new to these Bally's and reading the manual does not really help at all. :103-
Thanks, Tommy Title: Re: Setting up a Progressive Cham II+ on a Bally 6000? Post by: Ron (r273) on August 07, 2010, 07:47:03 PM Thanks Ron, I will check this out. Do you also happen to know where the Bally needs to be set. I am new to these Bally's and reading the manual does not really help at all. :103- Thanks, Tommy Sorry Tommy, I set mine up on a S-2000. All but a couple settings are the same for both Bally and IGT in the CHAMII+ Ron (r273). Title: Re: Setting up a Progressive Cham II+ on a Bally 6000? Post by: morspeed on August 07, 2010, 07:55:59 PM Gotcha.
Title: Re: Setting up a Progressive Cham II+ on a Bally 6000? Post by: Simon Barsinister on August 07, 2010, 09:44:26 PM On the Bally options, try setting the following:
2=4 (Serial Multiplex progressive interface) 7=1 (# of external jackpots) 78LO=1 (machine address) Title: Re: Setting up a Progressive Cham II+ on a Bally 6000? Post by: morspeed on August 09, 2010, 05:10:33 AM When I set 2 to 4 Progressive link serial I get a 91-0 code. I had to rebirth my Chamm II. Do you happen to know the settings on PSP for the Bally 6000??
Thanks, Tommy |