New Life Games Tech Forums

Well here is my latest project: I totally stripped down an S+ to the bare metal and started with 3- 4x8ft sheets of silver diamond plate laminate this one has a chop top a 16" top cab and a round top cabinet all matching diamond plate laminate, so here are some pictures of the project through out the project.

when this one is all done it will be for sale

Goldfinger

a couple more pictures

here are a couple of the chop top before and after

and a couple of the round top

here are a couple of some of the reassemble and will post more as this progresses

this diamond plate laminate is looking pretty sweet well its late and am going to turn in will post more tomorrow
thanks for looking.
do ya think this one should have a diamond plate stand to match or will that be to much lol?

my 2-cents a diamond plate stand with diamond plate machine is to much !!--nice work

what is the thickness of the laminate in the diamond plate ??

you can always get some 1/4 -inch steel diamond plate for -retro-fitting --border patrol slots --- that would be hilarious :72- :72- 

although the diamond plate stands would look sharp with a gloss black round top on it !!

 even a polished aluminum diamond plate  slot stand --for some of the modern games

just have a hydraulic lift so you dont leave your seeds on the floor picking it up .. :97- :97- :97- :97- :97-

I have one of my machines I was looking at relaminating. How much grief was taking the handle off / on

Jay handle removals are easy
look tougher than it is .. just dont bang the head while inside it hurts ..

I wear my TinFoil safey helmet any time I am out of my lead sheilded bedroom.....  :131-

you need the DYLITHIUM CRYSTALS in bedroom or you may really bang your head repeatidly along with anyone near you !!

tin foil hats or tin foil safety helmets are TEXAS  law only ..  :97- :97- :97- :97-oh i think i wet myself .. :97- :97- :97- :97- :97-

here are some more pictures of my project an the player tracking bar I built

player tracking bar

on gluing the laminet on the player tracking bar with contact cement, be sure to coat both pieces and wait till its pretty drie before you put them together you only get one shot at it, once its stuck its stuck. I cut the laminet on the table saw to the same size as the wooden player tracking bar
Goldfinger

2 more of the laminate glue up, then I painted all the edges and back with a crome paint.

and here are a couple of pics of the round top setup keep in mind there is a 9" top box and a 16" top box all matching, will post more pics of those 2 later
This glass kit I found one piece at a time came from the majestic casino and is a triple diamond deluxe clone a pretty nice kit had to custom make the real strips for it.
thanks
Goldginger

and here is a side view
Goldfinger

Looks great. One question. Where does one buy the laminate to do this?

I purchased mine at a close out place so i built a round top , a 16" top box and a 9" box all to match the machine is like new and is forsale for $650.00 with all 3 tops and a RT haywire kit installed in it
Bob