|
Title: Touchpad setup Post by: laneman on August 13, 2010, 01:14:04 PM Could someone please post or email me a picture of the whole setup for the touchpad version of multi-denom as it sits in the machine.(touchpad,VFD and seven segment display)
I need to see where some of the connectors go. Thanks in advance Title: Re: Touchpad setup Post by: jes7641 on March 18, 2013, 11:23:08 PM dont have a pic but can tell you how to set it up there are two wires required one that feeds through the denom box and the other that goes through board display and you must have a sticker dont have to be multi denom any one 10cent 25 cent no matter it goes on glass then the touch board faces the glass with the plug facing away from glass then the box with the seperators in it and thats it then key chip you machine erase ram and eprom set up denoms be sure to set percentages or denoms wont let you select them then set machine up and bam your good to go
|