New Life Games Tech Forums

I was trying to tokenize my S2000's. I can't seem to get the base denom to change from .25, accounting denom won't budge from 25 cents either. I can change denoms with the key chip to any amount up to $500 but as low as it'll go is 25 cents. When I change to a higher denom say $1 I'll have to put 4 tokens in to get 1 credit. Do I need to ram clear and start from scratch?  :103-

I was thinking about this...
Maybe your particular chips do not allow for lower denominations?
If you can get a PSR sheet on them maybe it will help you?

Brian,

I think if the accounting denomination is set at a quarter then you may have to do a clear to set the accounting denomination  to another value. I usually set it to a penny since I disconnect the meters. I will let the experts tell you if this is true or not?

I know that you can not use a denomination lower than the accounting denomination.

CaptainHappy :95-

IF the accounting denomination is .25 and you want to change it you will have to clear the machine with the clear chip.

After you Clear it set your accounting denom to .01 and then set your game denom to what you want it to be.
then set the coin value. IF the coin value is higher than the game denomination. it is tokenized
When you do this the machine will be set up that all coins will go to credits. The only way you can have coins go to game is the coin and game denomination have to match exactly.
 

Alright, I'll give a clear and try again tomorrow, keeps me from doing yard work

Thanks Foster

Worked like a charm.. never could get the pesky tokenization menu to show... just went to token cashout option.

Anyway, set my accounting denom to .25 (tried it at .01 at first... no no no no no), coin value to $50 and player denom to .25 and get 200 credits for 1 token

 :136-