|
Title: IGT I-game + Error Post by: aklarry on August 14, 2010, 02:27:40 AM :103- I am getting a Error on start up in my Tabasco stating Bad Pixel ROM, Replace Pixel ROM What chip or SIMM is it talking about We have just about determined that the game board is causing the problem but I would like to know what component the error is talking about.
Thanks AkLarry Title: Re: IGT I-game + Error Post by: laneman on August 14, 2010, 02:34:37 AM I had the same thing one time,reseated all the simms and was fine after that.
Title: Re: IGT I-game + Error Post by: Crowsen on August 14, 2010, 01:06:31 PM That would be your CG ROM Simm Card I believe.
Title: Re: IGT I-game + Error Post by: cp on August 14, 2010, 01:41:51 PM Actually, the pixel is marked (labeled) : PXLF ... it is the pixel that are installed "vertical" / upright on the board. (not sure off hand if Tobasco has one/two or three plxf simm cards )
What I normally do, is pull the simm card, clean the connector edges of the simm card...maybe use a pencil eraser... re-insert card and boot up the machine. One other thing that I've ran into on "bad pixel" error.... try a different "slot".... There are 3 slot positions for pixels.. Usually if there is just one pixel... the one nearest the RAM eproms is the correct slot to insert the single PXL simm card.... HOWEVER, I've actually taken the pixel simm and tried it in slot 2 / and even slot "3"... and then machine came up with no pixel errors. If you continue to get the error... maybe the PXL file went corrupt. Good Luck. Title: Re: IGT I-game + Error Post by: aklarry on August 14, 2010, 04:17:44 PM Second set of software first came up with bad video ROM error that is why we are leaning to bad game board And Tabasco uses all three upright slots
AkLarry |