|
Title: S2000 7 segment micro to mini adapter info Post by: laneman on August 16, 2010, 12:11:01 AM Does anyone have a S2000 seven segment micro to mini adapter that they could please sell me?
Part number 60902500 (http://pic20.picturetrail.com/VOL1230/4328480/9119547/390876455.jpg) Thanks Title: Re: S2000 7 segment micro to mini adapter info Post by: reho33 on August 16, 2010, 12:35:40 AM Maybe if you're nice, Bunker will make you one, he likes challenges like that.
Title: Re: S2000 7 segment micro to mini adapter info Post by: laneman on August 16, 2010, 12:37:59 AM We have discussed that option. :)
Title: Re: S2000 7 segment micro to mini adapter info Post by: stayouttadabunker on August 16, 2010, 12:54:21 AM I need the measurements in centimeters or inches of the width and height of these two connectors.
I also need to know the wiring pin outs... They appear in your photo to be straight through. I also need to know if there's receptor female pins or male pins in these connectors. I may have the white molex in stock. The minifit - I'm not sure. Title: Re: S2000 7 segment micro to mini adapter info Post by: laneman on August 16, 2010, 01:06:13 AM The adapter micro is male about 1" wide and about 3/4" high.
I dont know the dimension of the mini,just know its female. Heres the pinouts.. Title: Re: S2000 7 segment micro to mini adapter info Post by: Foster on August 16, 2010, 02:07:45 AM White one is Molex Mini-Fit Jr female chassis with male pin connectors
Black one is Molex mini-fit 3.0 or it could be micro-fit 3.0 male with female connectors Title: Re: S2000 7 segment micro to mini adapter info Post by: stayouttadabunker on August 16, 2010, 12:06:20 PM Laneman,
On the white Molex connector. There are 3 sets of raised lines. One line means pin #1, 2lines means pin #2, and three lines means pin#3. There are also small raised numbers on the back of the connector where the wires come out. Look for the number 1, that will tell me which pin is #1 location. On the Black Molex, there may be a triangular indentation indicating the 1st pin. This info is important if I'm to follow the wiring pin locations you've listed. It appears from your blurry photo that the wires are straight through but the listed pinouts tells me otherwise. It's obvious when looking at the blue wire which appears at pin#5 on the white molex but looks like it's running into perhaps pin #3 on the black molex. I've also checked my connectors and I don't have either one on hand. I would have to place an order through mouser in order to construct one for you. Title: Re: S2000 7 segment micro to mini adapter info Post by: laneman on August 16, 2010, 12:21:29 PM The picture I posted is from Railroad94.I dont have a actual cable.He said he will try to get some better pictures.
Title: Re: S2000 7 segment micro to mini adapter info Post by: blueridgeslots on August 16, 2010, 02:39:20 PM The Black connector is Molex Part Number 43025 12 Pin (male) and uses Female Pins, the White End is Part Number 5559 12 Pin (Female) and uses Male Pins, The Top wires on close up is Pin 1 is to Pin 1 on each, Black with Lime Green Stripe, pics attached
Title: Re: S2000 7 segment micro to mini adapter info Post by: laneman on August 16, 2010, 02:59:38 PM Thanks Jim for posting the pictures and the info.
Title: Re: S2000 7 segment micro to mini adapter info Post by: stayouttadabunker on August 16, 2010, 03:41:41 PM Good info Blueridge...Thanks. :3-
Now I can use the wiring pinout diagram as posted earlier. Let's wait around a day and see if any anybody has one for laneman. If not, I'll go order the required parts and construct one for him. Title: Re: S2000 7 segment micro to mini adapter info Post by: blueridgeslots on August 16, 2010, 08:49:04 PM Here is the pic from the old site when I had a good camera
Title: Re: S2000 7 segment micro to mini adapter info Post by: laneman on August 16, 2010, 11:44:19 PM Thanks to everyone for their help so far.
I agree,give it a day or two to see if someone has one. |