|
Title: Help!! Coin Handling Setup Bally 6000 Post by: morspeed on August 19, 2010, 07:14:43 PM Again I must be missing something as I have installed all my components and coin acceptor is enabled but the coin just drops through. Am I missing any Settings in the setup???
Thanks, Tommy Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: reho33 on August 19, 2010, 08:06:47 PM The switch in front of the MPU, should be UP
Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: morspeed on August 19, 2010, 09:57:08 PM Yes it is. I have to have it up for bill acceptance also.
Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: a69mopar on August 19, 2010, 11:55:32 PM what type of coin acceptor does it have? If it's a comparitor, then make sure the coin is in place. If it's an x-10 acceptor, then perhaps it needs to be programmed.
Thanks, Wayne Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: morspeed on August 20, 2010, 01:46:48 AM it is an intelligent comparator for 1 dollar tokens. Not sure what the model is because the cover was changed at the casino. It is the kind with the coin optic built in.
Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: stayouttadabunker on August 20, 2010, 02:46:52 AM Is there a glass prism behind the coin-in optic board bracket?
Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: morspeed on August 20, 2010, 02:59:22 AM The coin optic is built in to the comparator. There is not coin optic down below. the harness all goes to the coin comparator.
Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: a69mopar on August 20, 2010, 09:13:33 AM I would suspect the comparitor, however if you changed option 81 from it's default of 1, you'll have to change it back.
Thanks, Wayne Title: Re: Help!! Coin Handling Setup Bally 6000 Post by: morspeed on August 20, 2010, 01:40:49 PM I believe you are talking about the enabling of the coin comparitor. If so it should be default as I did a ram clear. Do you know what model I would need for 1 dollar tokens with the optic already built in? MC or the intelligent comparitor?
Thanks, Tommy |