|
Title: bally E machie Post by: billzel on September 05, 2010, 04:44:39 PM i have a bally e2226 5 slot that has quit working. it shows tilt and when i press the reset button, the tilt light goes out for about 1 second then back on. any suggestions as to a remedy would be greatly appreciated. thanks bill
Title: Re: bally E machie Post by: proten on September 05, 2010, 04:51:52 PM Is there a code in the display?
Title: Re: bally E machie Post by: billzel on September 05, 2010, 05:03:55 PM the display reads " 50.0.00" when the reset is pushed, the last zero changes briefly to 5
Title: Re: bally E machie Post by: proten on September 05, 2010, 05:22:29 PM The 50.0.00 is the "door open" code, the 5 that flash is the last coins paid out (5).
You could have a loose or dirty connection and need to be cleaned. Do you have the manual for this machine? PM me you email and I can send you a copy. Paul Title: Re: bally E machie Post by: billzel on September 05, 2010, 06:50:10 PM the "door open" indication is constant, even thought the circuit has been altered to show closed at all times. the second dot has not always been there. bill
Title: Re: bally E machie Post by: billzel on September 05, 2010, 06:52:22 PM p.s. i do have a manual
Title: Re: bally E machie Post by: proten on September 05, 2010, 06:53:58 PM It could be a bad door switch or a broken wire.
The Bally manual I can give you has all of the test and wire diagrams. Title: Re: bally E machie Post by: proten on September 05, 2010, 06:56:57 PM Run through test # 3 to test the switches.
Paul |