|
Title: Hopper problem Post by: Jimise on September 09, 2010, 02:55:54 AM Hello all.
I am getting a runaway hopper message in the VFD display, Sigma 300. Any idea what would cause this one? :103- Thanks! Jim..... :131- Title: Re: Hopper problem Post by: Randy0777 on September 10, 2010, 03:51:17 AM Hi Jim,
When do you get the error? Turn the machine off,pull the hopper and restart the game...Is the error still there?. ..I doubt it :37- Title: Re: Hopper problem Post by: Jimise on September 11, 2010, 12:50:42 AM Well, I switched out the boards and the hopper error is gone!
Thanks Randy! Now it keeps telling me the door is open! :96- Title: Re: Hopper problem Post by: Randy0777 on September 12, 2010, 04:52:09 AM :103- Which door is it is saying is open...Help a brother out :200-
Title: Re: Hopper problem Post by: Jimise on September 12, 2010, 02:47:39 PM Hi Randy,
It is the main door on the machine. Somewhere along the line, Someone reversed the wires to the cherry switch on the door, So when the door was closed, It said it was open. So it had nothing to do with the hopper problem. Im not sure what caused the hopper error. When I put a different board in the machine, The hopper error went away. The machine is working great now! :103- Which door is it is saying is open...Help a brother out :200- Title: Re: Hopper problem Post by: Randy0777 on September 12, 2010, 03:31:55 PM Glad you got it working :244-
|