|
Title: IGT S2000 Manuals Needed Post by: hondadude on September 14, 2010, 03:24:11 AM Hello everybody im new here and this is my first post....Im looking for any info on IGT S2000 slots....I just purchased several non working Double Diamond machines....look great but not working....any info would be greatly appreciated!
Title: Re: IGT S2000 Manuals Needed Post by: Brianzz on September 14, 2010, 03:49:13 AM Not working meaning? It's pretty broad. Do they power up? VFD messages?
Title: Re: IGT S2000 Manuals Needed Post by: Buzz on September 14, 2010, 03:52:23 AM Wellcome to our Happy family. :88- :88- :88-
Before we try to find you a manual, why don't you post a couple of pictures of your machines and give us a chance to show how smart we are. Really we work cheap, a thank you and a cup of coffee is all that's required. Sometimes we don't get either. All BS aside, I don't know beans about a slot machine, I'm just the greeter so please post the pics so I can keep my job!! Title: Re: IGT S2000 Manuals Needed Post by: hondadude on September 14, 2010, 04:33:22 AM I havent picked up the slots yet....going to Friday....just trying to get a head start on the repair process...they do light up is all I know :8-
I will post some pics this weekend! Title: Re: IGT S2000 Manuals Needed Post by: hondadude on September 14, 2010, 05:23:23 AM Hey Buzz I love the shirt....where do I get one like that?
Not to stray from the subject but I will be trailering these home.... the floor of the trailer is wood .....is there a way to screw these down to the wood floor from the bottoms of the slots to keep them from jumping around while transporting them...should be some sort of holes in the bottoms of the slot case to do this? I really don't want to use straps on them! Title: Re: IGT S2000 Manuals Needed Post by: Buzz on September 14, 2010, 05:59:57 AM You bet there are holes in the bottom that was used to bolt them down in the casino. I think the holes are 3/8" I use straps, never had a problem. Or you can make sure the hoppers are empty ( if they have hoppers ) and lay them on their backs. Some guys tape the glass so it can't fall out and break, which is a good idea. I suggest when you get them home and before pluging them to remove the MPU board located lower left side next to the hopper, make sure no nuts, bolts, washers,, coins, or anything else metal came loose that can short out the board. Your boards are vertical so should be OK, but check anyway. I sent you a PM
Title: Re: IGT S2000 Manuals Needed Post by: Foster on September 14, 2010, 06:04:18 AM There are 3 or 4 holes for carriage bolts that are used to secure them to slot stands.
5/16" x 2-1/2" carriage bolts is what is used to bolt them to the stand. Title: Re: IGT S2000 Manuals Needed Post by: Buzz on September 14, 2010, 06:19:23 AM Forster want to get in a pissing match? What size wrench does it take to remove the nuts? Never mind your right, I would have bet the farm they were 3/8 but I went out to my trailer and found one that was in a machine when I got it, 5/16 X 2 1/2 See the days not lost I learned something. :3- :3-
|