|
Title: Install strips Post by: DorothyMacaw on September 15, 2010, 02:06:48 PM I have a new set of back lit reels and am looking at them before installing my Ms. LGM strips. I am vexed. I fail to see any difference any place on the reels that would guide me on where to start putting the strips. What am I missing?
- Dorothy Title: Re: Install strips Post by: brichter on September 15, 2010, 02:18:28 PM There's a bump on the outside of the reels (left and right outside edges) that correspond to a square tab in the groove the strips ride in. These tabs fit into the notches on the strips.
Title: Re: Install strips Post by: DorothyMacaw on September 15, 2010, 02:31:39 PM Oh !! Duh !!!
I saw and felt the bumps, but on looking closely at the reel itself the braces are not at 90 degrees to each other as I had assumed, Now I see how the reels know where they are in relation to the payout line. Thank you Brichter. - Dorothy |