|
Title: DBV-200-SH Problem/Question Post by: AffordableSlots on September 15, 2010, 10:31:08 PM Hi all, I am kinda a newbie on here and was needing help to get my DBV--SH head to work.... I had it working in a Bally 5500. I Am trying to swap it into my Sigma 150B slot machine. I put dip 10 on on bank 1, and it seems to load like normal and takes bills. The Machine says "Bill Accepting" when I put money in, but it wont add credits and wont load money to the staker. The chip id on the head says "ID-044P/045P". I hope this helps with my issue. Is it possibly the wrong head for a Sigma? or is it the wrong software or dip settings? Thanks in advance for any help. :103-
Title: Re: DBV-200-SH Problem/Question Post by: Jim on September 15, 2010, 11:05:26 PM Sigma, Bally ,and Williams all use the SH type 200 head. Bally and Williams use the 044 IDO, Sigma however uses a 011IDO, so that is why it won't work. If its a flash memory you will have to have it flashed to the new IDO to work. If its a EPROM then you have to get a new EPROM.
Jim Title: Re: DBV-200-SH Problem/Question Post by: AffordableSlots on September 15, 2010, 11:22:07 PM ok, I Will have to check on geting it flashed then.
Thanks |