|
Title: IGT error code cycle 1-9 Post by: AffordableSlots on September 21, 2010, 06:24:05 AM :5- I just got an IGT s-plus sit down model slot machine. When I plug it in the reels spin and cycle normally, then I get codes 1,2,3,4,5,6,7,8,9 that keep cycling over and over again. each number displays one at a time in sequence from left to right... 1,2,3,4 light up in the top display, then 5,6,7,8,9 display in the bottom display. I have looked all over for a fix or a meaning for this display of numbers... but I cant find any.
Any help or Ideas??? Thanks... Bryan Title: Re: IGT error code cycle 1-9 Post by: Brianzz on September 21, 2010, 04:15:56 PM Looks like the display self test. Have you tried pushing the white self test button on the board or turning the jackpot reset key?
Title: Re: IGT error code cycle 1-9 Post by: knagl on September 21, 2010, 04:23:14 PM Might there be a clear chip installed in the MPU board instead of a valid GAME chip? :71-
Title: Re: IGT error code cycle 1-9 Post by: stayouttadabunker on September 21, 2010, 05:22:02 PM Could be the timer for a bomb? :200-
Title: Re: IGT error code cycle 1-9 Post by: stayouttadabunker on September 21, 2010, 05:23:40 PM lol....just kidding Bryan...
knagl might be right... turn off the machine, pull the board and see what chips are installed in the sockets... Title: Re: IGT error code cycle 1-9 Post by: Brianzz on September 21, 2010, 05:38:57 PM a clear chip counts up.. not 1 2 3 4 5 6 7 8 9 0
Title: Re: IGT error code cycle 1-9 Post by: AffordableSlots on October 11, 2010, 06:56:49 AM I figured it out... The machine came from a casino and it was looking for the server, so it was displaying the numbers 1 thru 9 waiting for a server responce. I cleared the game with the clear chips and it works fine now.
Title: Re: IGT error code cycle 1-9 Post by: knagl on October 11, 2010, 03:26:46 PM Interesting, I've never heard of that before. Thanks and K+ for posting a follow-up which may help someone in the future, and congratulations on getting your machine up and running. :3-
Title: Re: IGT error code cycle 1-9 Post by: stayouttadabunker on October 11, 2010, 03:58:02 PM The machine may have been configured to be SAS and EFT enabled.
It was searching for signals from the backroom server. These options, of course, are not needed for a machine in the basement of your home.... :96- |