|
Title: cei poker machine problems Post by: kenokarz on November 17, 2008, 03:29:37 AM got one of those pokers up and running for the chicago show , still have some problems but did get to play, this has a cc40 coin
mech that looks like no voltage , any one know if these are right for this machine also has a gpt b/v anyway here are some pics Title: Re: cei poker machine running Post by: Neonkiss on November 17, 2008, 12:14:22 PM Mine also has the CC-40 comparator.
I'll get my manual coppied and post it as a Pdf. Title: Re: cei poker machine running Post by: kenokarz on November 17, 2008, 02:42:50 PM good talking to you today, plus karma to you for the help, will keep you posted on the machines, will check the other coin mech tonight
and post more pics Title: Re: cei poker machine running / help please Post by: kenokarz on November 18, 2008, 03:14:26 AM OK got the coin mech problem taken care of , it was a fuse on the mother board not giving me 110 v to transformer to the coin mech,
what neonkiss and i need is some major help, we are coming up with a mux error code, what this is is the board is looking for a b/v that is not on the machine, we are running 906 III turbo boards, and need to know how to disable the b/v i got into some of the menu area but does not show how to turn off b/v this has to be on the main CPU someplace because when i put this board into a machine with a b/v everything works fine any ideas would be a great :99- :99- :99- Title: Re: cei poker machine running Post by: kenokarz on November 19, 2008, 03:30:23 AM ok i got into the learn menu and shut the b/v off, unpluged all the b/v stuff and the machine still comes up with the mux error
seems like the machine is not saving the settings, but if i go back into the learn mode it shows the b/v none what am i doing wrong ??? Title: Re: cei poker machine running Post by: KirkLasVegas on November 21, 2008, 01:13:28 AM If I am not mistaken, my CEI had the "MUX ERROR" also displayed on the left side of the tube. It was looking for a SAS/network or host.I too could not get it to go away, despite turning off the Host mode.
The B/V worked just fine. in fact the entire machine worked fine.... Kirk Title: Re: cei poker machine problems Post by: kenokarz on November 21, 2008, 02:24:53 AM gostryder is going to check it out and let me know i have not tryed the host mode yet, my b/v is junk i would like to sell machine but the
the poeple that were looking at it want the mux error to go away, someone out there has to know more about these machine than i do neonkiss is also having the same problem ,any old timers out there that have had this problem ??? Title: Re: cei poker machine problems Post by: doyson on November 27, 2008, 12:46:49 AM on the mux error on cei 906 III t+ boards the only way to clear it
is to have the mux board connected to the serial port there is no way turn it off with the software in the game board. Title: Re: cei poker machine problems Post by: Neonkiss on November 27, 2008, 01:13:52 AM Kenokarz, My MUX error message is gone. I wish I could tell you how I did it. All I can say is I removed the battery from the board when I put it on the shelf for storage. I haven't done anything with it for over a year. You then started this thread and I went out and installed a new battery in my board. When I powered it up the error was gone and has not returned. You may want to try unsoldering the battery. Then short out the + and - on the board. You may have to leave this on for a wile to drain any voltage stored in the caps. The re-install your battery.
Just a thought, Robert K |