New Life Games Tech Forums

It's the dumb one again. On 2000 does anyone have wiring diagram for installing bonus reel. I have extra wires on  r & L side of tray harness.
Another question. On R side of cabnet back behind reel tray what is the box. I don't have it but I think that might be where some wires go.
Thanks for all the help, Ford

Can you post up some photos?

Jason

2 on r & 2 on L on reel tray harness. White plugs.

Inside of cabnet

The box on R side on  back on my Cleopatre has wires going to unit on outside of motherboard. I think it has sonething to do w/sound.
I don't know what a lot of this stuff is.

I think it's for backlight for reels

The box on the back right hand side of the cabinet controls backlighting on the reels. The box mounted near the MPU is the cabinet I/O board. Reel control plug goes directly to the motherboard. If you have a backlight controller it will have a plug that goes over to the cabinet I/O board which then also plugs into the motherboard

Thanks Cowboy. I was doing some looking & thought that was what it was. I don't have to use it. K+

No problem, glad to help. I just updated my cleo with led backlighting so I had to change a lot of wiring and that control board. Past experience for future assistance :89- Only thing that keeps this sight going :244-

2 on Right go to Backlit Controller, it is different than the 3 Reel Controller, same as a 5 Reel Controller, the 2 White Connectors on the left are for the Dazzle Board on the 4th Reel and go to the Motherboard in the Spare Netplex plug, you remove the existing connector, and replace it with the one from the Dazzle Board, and put the one you removed into the Female Plug of the Harness from the Dazzle Reel, (Daisy Chain)

Thanks Jim. Will check it out tonight. K+