|
Title: effinet monitor Post by: racergiant on September 16, 2008, 06:25:54 AM Started by seminole -
can anybody tell me with component to replace in a monitor ( kortek or effinet) when he is shacking please Title: Re: effinet monitor Post by: racergiant on September 16, 2008, 06:26:14 AM By rickhunter -
Most likely the caps on the monitor's power supply. It would help a lot if you could tell us the model number of your monitor and it's maker. Title: Re: effinet monitor Post by: racergiant on September 16, 2008, 06:26:45 AM By seminole -
Quote from: rickhunter on July 19, 2007, 11:02:15 PM Quote Most likely the caps on the monitor's power supply. It would help a lot if you could tell us the model number of your monitor and it's maker. i have a kotek 1982s and a effinet EFG-1901MTitle: Re: effinet monitor Post by: racergiant on September 16, 2008, 06:27:00 AM By Kerian -
If it's a Vertical shaking problem with the Effinet boards check C411 and C418 for bulging or high ESR. I've uploaded a schematic I drew up that may help (.PDF) and also attached it . I've seen other posts for the Kortek board on this forum that may point you in the right direction. Good Luck Title: Re: effinet monitor Post by: racergiant on September 16, 2008, 06:27:19 AM By aussietech -
HAD A EFG1902 COME IN RESISTORS BUNRT OUT R542 R543 R544 AND TOOK OUT THE IRF 640 BUT I ENDED UP WITH A HORIZONTAL SIZE PROBLEM i HAVE THE 35 VOLTS BUT CANT SEEM TO PINPOINT ANY HELP WOULD BE APPRECIATED THANKS |