New Life Games Tech Forums

I need help. When I acquired this 5000+ Naughty Nickles reel slot machine it had been partially gutted. I've replaced the obvious missing components but am now stumped on two things. Please see the attached photo. First, behind the hopper mounted to the cabinet back wall is a resistor assembly. The assembly consists of two 2.5 ohm 50W resistors wired in parallel. The wires are a red and a brown. Unfortunately the previous owner of this machine chopped the wires and I have no idea where they go. I've been over the wiring diagrams and cannot find a component that matches this one. Can someone identify what this resistor assembly is for? I hate to power up the machine until I know where the wires go.

Second, on the far right side of the cabinet just below the handle assembly is a pair of wires with push-on terminals. In my machine they slimply lay loose not connected to anything. I don't see anything in that area of the machine that matches those push-on terminals. Can someone identify them?

Thanks in advance for your help.

Think the wires go to bottom speaker.