|
Title: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 10:01:46 AM Hi
I'm new to this board, so I'm not sure where should this thread go. Feel free to move it around as needed. I got this IGT M-Slot model 1631c. It's in good cosmetic shape, with a nice stand too. Was not working with TILT CMOS. Previous owner tried to fix it and couldn't. He replaced te battery but the error still didn't clear. I reset the CMOS as per manual and that cleared that TILT CMOS, but now is stuck on TILT CI 1. There's nothing stuck in there. :103- Went in test mode and the optos under the comparitor works. I cleaned them anyway but that didn't change anything. Can it be the comparitor itself??? It's an old CC-15. No idea how can I test these. After more :103- yesterday, I think it has something to do with the game not seeing the door closed. There were some wire ripped off there. I did put them back to the door optics. I'm convinced now that one side at least is not working. How can I test which one is bad, sender or receiver? And last, I got more weird wires at the interlock switch. Which was taped over by a previous "tech". That green and yellow/red wired should be connected where? What terminals? And the two blacks are connected to the right terminals on that switch? Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 10:04:56 AM more
Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 10:06:27 AM coin comparitor
Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 10:07:55 AM more
Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 10:09:18 AM more
Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 10:11:14 AM interlock wires
Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 10:13:41 AM last pics
Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 08, 2010, 03:32:04 PM I forgot: this will be sitting in a home, so if theres a way to get rid of the door optics somehow it will be easier... I think... I found something but it was for a S+ game. Not sure if is the same wiring. Seems that they have diferrent colors on wire.
Any help would be appreciated. Title: Re: IGT M Progressive TILT CI and wirring Issues Post by: Splitskull on October 16, 2010, 10:57:47 AM all fixed now.
|