Title: Need Game King Set Up and Reset Procedures Post by: dcslots on October 08, 2010, 05:15:25 PM :99- Looking for help/detail on Setup and Ram Clear procedures for IGT Game King operating on SAS6 Protocol (Blue Screen as oppossed to the red), 3902 Board using Key Chip 22.
There is one manual on the site that I saw, but it's the maintenance one ( :244-) which does not really give me what I need. IDEALLY if you have the instillation manual or the troubleshooting manual in PDF and could e mail, it would be a help. Or if you have the basic procedures you can post on Ram Clear and Setup for this unit, that would also do the trick. But if you post the procedure, please remember, I am slightly stupid and being rasied in NY, English is a second language to me. :186- I KNOW there used to be a mess of these things posted on the site before it changed over....whatever happened to the section with all the manuals? Title: Re: Need Game King Set Up and Reset Procedures Post by: Buzz on October 08, 2010, 06:14:23 PM I KNOW there used to be a mess of these things posted on the site before it changed over....whatever happened to the section with all the manuals? Money got tight from lack of donations, something had to go !!!!!!!!!!!!!!!!!! Some folks are users and non contributors Title: Re: Need Game King Set Up and Reset Procedures Post by: knagl on October 13, 2010, 06:48:20 PM I'm not sure that I have the manual (I'm at work right now and I know I don't have it here), but it's not too tough to set them up -- here's what I had to do on mine (granted, mine has the red setup menu buttons, so I don't know if there's a difference):
- Replace the BASE chip with the keychip - Power on, choose to clear everything from the keychip menu - Power off when prompted, swap the chips back - If there are any errors, turn the jackpot reset key to get past them - Set up the denominations you want available and what game(s) you want assigned to each denom - Don't press "Exit" until everything is set up, or you'll have to keychip again to change the settings Title: Re: Need Game King Set Up and Reset Procedures Post by: Yoeddy1 on October 15, 2010, 02:35:27 PM Agree with knagl.
Title: Re: Need Game King Set Up and Reset Procedures Post by: dcslots on October 15, 2010, 02:39:53 PM Will attempt the above this weekend. If I should blow myself up (which is always a possibility when you put me near any electronics), please let Megan Fox know I only temporairly lost my affections for her when I saw Kim Kardashian in a Bikini. I mean, I am only humen for gods sake.
Thanx knagl and Buzz. Title: Igt game king 3902 board Post by: icdeadfish on March 16, 2012, 12:35:53 PM Can I put all slot games on first screen 25cent then some keno poker on the remaining 25 cent then poker ect. On the 50 cent and dollar some slot games only show up under dollar section when you have 9 lines eats credits up quick thanks. I probable would never be able to figure this stuff out if it wasn't for
N.L.G. Thanks :244- Title: Re: Need Game King Set Up and Reset Procedures Post by: Buzz on March 16, 2012, 02:05:02 PM The way you worded your question I'm going to assume you have a multi denom game set. Then the ans, is yes you may set up to 12 different games per. denom.
Your going to need maybe a clear chip and for sure a key chip. I suggest a Key 040 ( it's both clear and Key ) I would also suggest before you start making changes, to make a chart of which games you want at what denom. I would also suggest that the reel games that take 81 credits per spin ( that can be changed ) set them a .05 cents per credit. Title: Re: Need Game King Set Up and Reset Procedures Post by: icdeadfish on March 16, 2012, 02:15:52 PM Thanks for quick reply the most credits one game will take is 9 for 9 lines $9 a push you put 81 maybe hit the one by accident thanks happy days are here again :72- :72- :72-
Title: Re: Need Game King Set Up and Reset Procedures Post by: Buzz on March 16, 2012, 02:28:37 PM I'm pretty sure if you clear the machine the default will go to 9 credits per line.
Title: Re: Need Game King Set Up and Reset Procedures Post by: icdeadfish on March 16, 2012, 02:39:51 PM someone sold me a 22 chip told me that is what I needed what now???
|