|
Title: New member looking for help with IGT slant top Stinkin Rich Post by: Uhcoug2011 on October 16, 2010, 03:40:26 PM Good afternoon everyone!
New member on the site and have an issue would greatly appreciate someones help. I have a Slant Top IGT game that is a touch screen however the button display on the IGT is the covered up style as in there are no buttons. I am trying to figure out how to convert it but I don't understand what else I'd need other than the button set because the actually slant top is not slated for buttons is there a piece that I can purchase to replace it? I would appreciate any help thanks again. Title: Re: New member looking for help with IGT slant top Stinkin Rich Post by: brichter on October 16, 2010, 04:14:13 PM Pictures... We need pictures.
To quote Bunker, the more you show us the more we can tell you. Title: Re: New member looking for help with IGT slant top Stinkin Rich Post by: Uhcoug2011 on October 16, 2010, 04:19:15 PM Pictures... We need pictures. To quote Bunker, the more you show us the more we can tell you. Yes sir I'll try ta get some today to better explain, thanks! Title: Re: New member looking for help with IGT slant top Stinkin Rich Post by: stayouttadabunker on October 17, 2010, 12:50:34 AM Sounds like you might need a button harness and a button panel armrest?
Title: Re: New member looking for help with IGT slant top Stinkin Rich Post by: slotsteve on October 17, 2010, 08:30:52 PM add to list 2 small boards the buttons plug in too
Title: Re: New member looking for help with IGT slant top Stinkin Rich Post by: Uhcoug2011 on October 18, 2010, 01:46:46 AM Sounds like you might need a button harness and a button panel armrest? Any idea where I can find those? I would greatly appreciate the help! Title: Re: New member looking for help with IGT slant top Stinkin Rich Post by: Uhcoug2011 on October 18, 2010, 01:47:05 AM add to list 2 small boards the buttons plug in too Any idea where I could get those? I'd greatly appreciate it. Title: Re: New member looking for help with IGT slant top Stinkin Rich Post by: kforeman on October 27, 2010, 10:35:40 PM :103- is there a button panel blanking plate installed? in the place where the buttons should be is there a thin flat piece of steel that is bolted in on the inside of the door? is there any wiring on the inside of the door aside from the door optic? i think slotsteve was referring to the Input/Output boards so check for them as well, if missing then you will definitely need them for button and light functionality. pics would help greatly. :211-
many people get buttons and various other machine parts from Suzo-Happ: www(dot)happcontrols(dot)com. i purchase from them on a monthly basis for many of my lighting and supplies needs but there are some things they cant get so check out the vendor links at the top of the page for manufacturer specific items, like the I/O boards. g/l :50- |