Title: PSP CON1 IN PEMTIUM XP Post by: clongames on November 19, 2008, 01:01:56 PM It(He,She) wanted that they help me with a manual to use this program PSP for the CON1 with laptop pemtium 4 with port USB http: // www.myslotnotes.com/PSP%20PROGRESSIVE.htm.
And as(like) connecting it to the controller of the progressive one. Title: Re: PSP CON1 IN PEMTIUM XP Post by: clongames on November 20, 2008, 01:25:06 PM Is the well-read one there that this program psp alone works with win 98 and does not work with win xp it is true it or I am wrong :103-
Title: Re: PSP CON1 IN PEMTIUM XP Post by: Slotmaster on November 20, 2008, 05:59:46 PM Is the well-read one there that this program psp alone works with win 98 and does not work with win xp it is true it or I am wrong :103- It works in XP as I set one up about 3 months ago via XP.Just run the program in a dos window. Was documented on the old site about how to get things going in terms of settings but it's a simple program to use. I used the default com ports and what not. Title: Re: PSP CON1 IN PEMTIUM XP Post by: jay on November 20, 2008, 07:23:42 PM As long as the motherboard supports hardware interrupts and has a physical serial port it should work.
Quite often the newer motherboards are using hardware emulators - drivers within XP that simulate hardware functions. In this case it will not work. USB to Serial convertors are known not to work. The lowest common denominator is an old laptop with Windows 98. You can typically pick these up at a used PC store or a pawn shop for under $50.00. Also you need to ensure the cable you are using has the right pins shorted. There is documentation all over the site about this so I am not going to go into it here. Title: Re: PSP CON1 IN PEMTIUM XP Post by: Slotmaster on November 20, 2008, 07:33:27 PM It(He,She) wanted that they help me with a manual to use this program PSP for the CON1 with laptop pemtium 4 with port USB http: // www.myslotnotes.com/PSP%20PROGRESSIVE.htm. Looking at what was noted in terms of hardware there should not be an issue but as said make sure to have a serial cable. And as(like) connecting it to the controller of the progressive one. Title: Re: PSP CON1 IN PEMTIUM XP Post by: OhioGaming on November 20, 2008, 10:03:10 PM I think pins 5 and 9 need to be jumped.
Title: Re: PSP CON1 IN PEMTIUM XP Post by: Foster on November 20, 2008, 10:07:59 PM pins 1 and 5
Title: Re: PSP CON1 IN PEMTIUM XP Post by: OhioGaming on November 20, 2008, 10:16:39 PM Thanks Foster .. I know which pins to connect out of habit .. just didn't know for sure what numbers they were.
Title: Re: PSP CON1 IN PEMTIUM XP Post by: clongames on November 21, 2008, 02:14:51 PM Already stoy obtaining the win 98 to try if it(he,she) recognizes me the port since with xp does not work. And also to be able to use the direct cable without adapter for USB thank you for his(her,your) commentaries they me are many usefulness(utility).
Title: Re: PSP CON1 IN PEMTIUM XP Post by: clongames on November 21, 2008, 02:16:51 PM When the progressive one not resete to his(her,your) amount base, prodia this one resetear in manual form and as(like) podria to make this, bony(osseous) simulating that the machine sending(parcel) put of reinstatement to the amount or prize base thank you.
|