|
Title: Atronic cashline roulette ram reset Post by: marco33 on October 21, 2010, 07:05:55 AM Hi,
I need informations please, I have a Atronic cashline roulette, years 1998 and i need a proceed for ram reset. Thank you, Marco. Title: Re: Atronic cashline roulette ram reset Post by: StatFreak on November 13, 2010, 06:55:28 AM :263-
Did you ever find the RAM reset information you were looking for? Stat :31- Title: Re: Atronic cashline roulette ram reset Post by: marco33 on November 17, 2010, 07:30:08 AM Hi,
Yes and no. I wait the informations by atronic. Thanks, Marco. Title: Re: Atronic cashline roulette ram reset Post by: TZtech on November 17, 2010, 04:33:49 PM Hi There
If these are the same as the standard cashlines good luck. You will need a Clear Chip and a config chip. From reports here it seems that US games have specific chips for specific games so it could get tricky. If you are using a comms board you will also need 2 clear chips for that board. It gets even more complicated if you want to enable and disable hardware and setup progressives. You will then need a PC with a serial cable and Atronic SW to program and this sw needs a dongle to enable. Regards Ian Title: Re: Atronic cashline roulette ram reset Post by: marco33 on November 18, 2010, 05:01:47 AM Thank you for your reply
These operations are new for me because before I worked in France and we did not reset the ram ... The name of chip config is U6? I have put in place what chip? Also, can I change a configuration without making a ram reset? Thank you, Marco Title: Re: Atronic cashline roulette ram reset Post by: TZtech on November 18, 2010, 05:32:25 PM Hi
Yes its possible to change config without a clear. refer to attached. Ian Title: Re: Atronic cashline roulette ram reset Post by: marco33 on November 20, 2010, 12:15:01 PM Hi,
Ok, thank you for the .pdf Marco |