|
Title: Invalid RAM Clear Configuration?!? Post by: Worldwide Gaming on October 27, 2010, 07:42:09 PM Trying to clear a Yukon Gold (550) and no matter what revision of clear I use (4.32 is the latest I have) from oldest to newest all give the same message. Have moved MB into another machine and problem follows it. Moved PROM's to another MB and the problem followed. Used two other sets of Yukon software, still the same issue. Also tried draining SRAM, didn't help.
AAAARGH!!! :37- :37- :37- Title: Re: Invalid RAM Clear Configuration?!? Post by: cruisepl on October 27, 2010, 08:19:48 PM Trying to clear a Yukon Gold (550) and no matter what revision of clear I use (4.32 is the latest I have) from oldest to newest all give the same message. Have moved MB into another machine and problem follows it. Moved PROM's to another MB and the problem followed. Used two other sets of Yukon software, still the same issue. Also tried draining SRAM, didn't help. AAAARGH!!! :37- :37- :37- Get hold of Jim at Blueridge. I use a 4.37 that I got from him to swap out my 550 games. No problems at all Title: Re: Invalid RAM Clear Configuration?!? Post by: Worldwide Gaming on October 28, 2010, 02:20:14 PM Figured it out!
Turns out if you set Yukon Gold to be a $0.01 "knock-off" (handpay only), you'll get that RAM Clear error - however, if you enable the coin comparitor and set it to a higher denom, set the hopper max payout to 1, and then enable multi-denom and select only $0.01 denom the machine accepts the configuration and allows the clear to complete. Title: Re: Invalid RAM Clear Configuration?!? Post by: StatFreak on October 29, 2010, 03:21:19 AM Thanks for posting the solution. :3-
|