|
Title: PSP Message Programming for Double Width Char ? SOLVED Post by: stormrider on May 27, 2013, 08:33:56 PM Okay trying to get double width char set up under jpot.do file
PSP manual states: Dbl Width Char ‖ Ctrl+F4 Defines text lines to be two pixels wide, where possible. This command is similar to bold text. Place it after Travel motion text lines.It is a toggle command; turn it off with the Sngl Width command which I did with no success :103- I have the chamII+ working (MFILE set to 0) showing current jackpot amount and my scrolling message as I like, but I really want the Double size text to show up instead. Have tried many different combo's of commands with No Luck :60- Hoping someone can post a working string of commands that will show double size. I could have sworn I had one set up this way before and saved the info but I can't find anything in my notes :30- Thanks. Tim Title: Re: PSP Message Programming for Double Width Char ? Post by: FORDSBS on May 28, 2013, 11:27:55 PM HERE YOU GO. :172-
ODMTR81 Title: Re: PSP Message Programming for Double Width Char ? Post by: stormrider on May 29, 2013, 12:03:26 AM :259- Ford......That did it :89-
After screwing with countless psp strings It ended up being the ODMTR8 setting on the chamII+ board to make letters double width :30- Which there are 3 #8 to choose from and of course I had it set on the wrong one.... Who would have thunk it. The Mikohn manual under MENU=DISPLAY FONT Does show a few fonts selections I did not have listed when scrolling through my chamII+ board I think that might come back to what software ver. you have at U19 location on the Cham board. Never the less everything is working now and a Big thanks to Ford. Tim Title: Re: PSP Message Programming for Double Width Char ? SOLVED Post by: FORDSBS on May 29, 2013, 12:08:39 AM Tim, After ALL the HELP you gave me I'm happy to help.
Ford |