|
Title: Progressive problem **FIXED** Post by: ghetto1971 on July 20, 2013, 11:28:58 PM Lost power for a few minutes. When it came back on, machine is running good but progressive is not increasing. I am clueless on what the problem could be.
Any help would be appreciated. http://www.youtube.com/watch?v=3Ge_z6IaCfg (http://www.youtube.com/watch?v=3Ge_z6IaCfg) Title: Re: Progressive problem Post by: lindam1 on July 21, 2013, 12:35:38 AM If power went out for Minutes I'm not sure, but if seconds I would turn off a couple minutes and reboot.
Title: Re: Progressive problem Post by: ghetto1971 on July 21, 2013, 12:45:42 AM rebooted twiced, same problem.
Never had this problem before. Title: Re: Progressive problem Post by: staz on July 21, 2013, 12:48:23 AM i would def reboot it and it should clear the problem...... that happened to my spin and win one time and that cleared it...
Title: Re: Progressive problem Post by: staz on July 21, 2013, 12:51:22 AM that weird........ do you have a surge protector hooked up??
Title: Re: Progressive problem Post by: ghetto1971 on July 21, 2013, 02:01:00 AM I have a surge protector hooked up. Rebooted again but still having same problem. :103- :103-
Title: Re: Progressive problem Post by: 4 Deuces on July 21, 2013, 03:07:58 AM My two cents ... unplug from the wall for a few minutes for all capacitors to clear and then plug back in and reboot. Periodically, that happens with my TV and I literally have to unplug it to reset it.
Title: Re: Progressive problem Post by: staz on July 21, 2013, 11:27:14 AM last option is you will have to get progressive reprogrammed.......
Title: Re: Progressive problem Post by: cp on July 21, 2013, 12:44:57 PM Dear Ghetto1971,
It would be my guess that the machine/cpu/settings, somehow, lost its' programming. i.e. it does not "recognize" that the progressive is installed. With NO credits on the machine you may be able to reset the parameters on the machine...or at least you can check the parameter / settings. I don't remember them off the top of my head...(perhaps you may have the settings) You can get to the machine / game settings by pressing the white test button on the cpu till you get to 11d (I believe)... stop and then the display should go to 27(something)...and then scroll thru the settings. There may be a link or posting on NLG for those settings to "enable" the progressive so the machine progresses. I guess the progressive may have lost its' "increment" setting.... However, I've never seen that happen before... There's always a first time though for anything ! Title: Re: Progressive problem Post by: lindam1 on July 21, 2013, 12:55:13 PM Make sure in the "11d" menu your setting are still as follows
02=0004 or 0005 What ever worked for your machine (Serial Multiplex progressive interface) 07=0001 (# of external jackpots) 78LO=0001 (machine address) Title: Re: Progressive problem Post by: ghetto1971 on July 21, 2013, 01:26:52 PM problem is fixed.
07 was set at 0000 instead of 0001 thanks lindam1 http://www.youtube.com/watch?v=3-bABjHrC5c (http://www.youtube.com/watch?v=3-bABjHrC5c) Title: Re: Progressive problem Post by: lindam1 on July 21, 2013, 01:34:43 PM Shxt Happens
Lindsay Title: Re: Progressive problem **FIXED** Post by: slotsteve on July 21, 2013, 02:49:56 PM I now get c10 and 0.00 , have to do some repair this afternoon in homes back after race is over
|