New Life Games Tech Forums

hello everyone i just got my first poker machine old one its a cal omega it has a coin bill validator on it model 1vo2 made by coin bill validator inc from new york my problem is some body stuck a bill in it and push the validate bill acceptor on the poker machine  now the bill exceptor will only take 5 old dirty one dollar bill  it use to take fives tens twenty's and so on is there a way to recalibrate this bill acceptor so it will take all bills again thankyou for your time

Try cleaning the optic lenses with Q-tips and water?

did that over weekend  and still dont work

Just about any of the NLG vendors on top of this page will have calibration cards for you bill acceptor with instructions.
Place an ad for your wants in the NLG "Classifieds" section!

 i looked at all those sites and cant find any calibration cards and put ad in classified area any more help would be helpfull thanks agian

Most of the vendors don't list everything they have...
you are very welcome to call them as most of
them do have their phone numbers listed.
Go ahead and give 'em a call, they won't bite you... :72-

Hello Doogie

Tracked down the manual from another member - Thanks Uniman  :88-

Here is what you need to do

* Cut a piece of plain white paper to the same size as a note.

* Power down Validator
* Depress the service switch and keep it pushed in while powering up the BV.
* Insert the piece of paper into the BV channel.
* It will slowly step the paper out of the BV.

Video level is now done and you can test BV agin in normal game mode.

Regards
Ian

thanks i will try that can u see if uniman has the dip switch settings  and i cant find no service switch on the bill validator thanks agian

Hi

There is a small hole above and to the left of the dipswitch cutout. Use a paperclip or something to depress the lilltle switch. That is the service switch.

Ian

update the software!

I think they are now Global Payment Technologies:

http://www.gptworld.com/GPT.htm (http://www.gptworld.com/GPT.htm)