New Life Games Tech Forums

**Reel Slots** Gaming Machines => Bally Reel Games. => Topic started by: coinopshop on June 03, 2010, 11:56:20 AM



Title: Bally 5000 HOPPER BOARD troubleshooting ????
Post by: coinopshop on June 03, 2010, 11:56:20 AM
 Helllo again,

 Just about have my BLACK/GOLD Bally 5000 going. I have a hopper pcb problem ( well two actually ).

 Hopper pcb# 1 - green led stays lit, nothing happens to dispense any coinage.
 Hopper pcb #2 - No leds lit, does nothing when coinage should be dispensed.

 HOPPER IS 100% WORKING CONDITION ( as checked in another 5000 ).

 Is there a thread on Bally hopper pcb repairs, or do these symptoms sound familiar to anyone ?

 Thanks,
 Dave.


Title: Re: Bally 5000 HOPPER BOARD troubleshooting ????
Post by: coinopshop on June 03, 2010, 01:06:45 PM
 UPDATE:

 Found Q8 to be shorted on the hopper pcb. Replaced and now when a winner should be dispensed, the green led lights for a second and the yellow led comes on now ( Some type of over-voltage protection circuit is kicking in ). Hopper still won't dispense. Also changed Q7 and U5....no luck.


Title: Re: Bally 5000 HOPPER BOARD troubleshooting ????
Post by: coinopshop on June 03, 2010, 01:42:07 PM
UPDATE:

 Found Q8 to be shorted on the hopper pcb. Replaced and now when a winner should be dispensed, the green led lights for a second and the yellow led comes on now ( Some type of over-voltage protection circuit is kicking in ). Hopper still won't dispense. Also changed Q7 and U5....no luck.

 Changed U3 and U7. Still same problem.....


Title: Re: Bally 5000 HOPPER BOARD troubleshooting ????
Post by: TZtech on June 03, 2010, 06:06:20 PM
Have a look at these - http://newlifegames.net/nlg/index.php?topic=289.0

What is the part number on your hopper boards ?


Title: Re: Bally 5000 HOPPER BOARD troubleshooting ????
Post by: coinopshop on June 03, 2010, 08:26:28 PM
Part number on front of pcb: AS-3356-13 then right below that P-9018-13

 Anyone have a working one for sale maybe ???


Title: Re: Bally 5000 HOPPER BOARD troubleshooting ????
Post by: coinopshop on June 03, 2010, 08:34:58 PM
 HERE'S A PIC of the Bally hopper control pcb