Welcome, Guest. Please login or register.
October 31, 2024, 10:00:25 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Monitor Repair Log and Database. **Arcade and Gaming**
| |-+  Monitor Repair Tech Support
| | |-+  Gamemaker monitor		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Gamemaker monitor  (Read 6258 times)
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« on: May 06, 2011, 12:44:53 AM »
I usually leave my gamemaker on all the time but recently the switch that the socket is powered through got turned off (kids or house cleaning or something) and when I tried turning it back on, I noticed that the monitor didn't fire up. I turned it off and back on a couple of times and it came to life. Of course not long after it happened again and someone cut my power. Again it took multiple times to get it lit up again. This last time, someone cut my off at the power strip since we put tape on the switch to keep it from happening again and now, low and behold, the monitor wont fire up.
Is there a replaceable piece that went bad or am I looking at a whole new T/S monitor?
Thanks, Jim
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #1 on: May 06, 2011, 01:34:53 AM »
I'm going to move this to the monitor repair tech support board, since it will have more visibility to the folks who will be most likely able to help you.


StatFreak garfield
nlg  Global Moderator
« Last Edit: May 06, 2011, 03:20:41 AM by StatFreak » Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Firebird
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 243
« Reply #2 on: May 06, 2011, 03:17:13 AM »
 Please Post Pictures of the monitor and the board inside it
Logged
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« Reply #3 on: May 06, 2011, 03:02:26 PM »
Here's a few.
Thanks, Jim

* Game Maker 7000 001.jpg (809.49 KB, 1600x1200 - viewed 346 times.)

* Game Maker 7000 002.jpg (853.17 KB, 1200x1600 - viewed 358 times.)
Logged
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« Reply #4 on: May 06, 2011, 03:04:42 PM »
and more.

* Game Maker 7000 004.jpg (858.79 KB, 1600x1200 - viewed 380 times.)

* Game Maker 7000 007.jpg (858.28 KB, 1200x1600 - viewed 410 times.)
Logged
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« Reply #5 on: May 06, 2011, 03:06:09 PM »
one more.

* Game Maker 7000 006.jpg (893.05 KB, 1600x1200 - viewed 367 times.)
Logged
AnotherTech
Guest
« Reply #6 on: May 06, 2011, 11:22:38 PM »
If that is a Tatung monitor, it is probably the power supply section of the monitor board.  C106 and C109 if I remember right, are the ones that go out often.  Just replace those caps if you don't have a way to test them.  If you have a cap tester, you should test all the caps and replace the ones that are bad.  On that old of a monitor, there are probably a lot of bad caps that are just hanging on.
Logged
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« Reply #7 on: May 10, 2011, 09:26:41 AM »
Thanks, I'll give it a shot.
Jim
Logged
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« Reply #8 on: May 12, 2011, 01:08:32 AM »
You're correct on the monitor brand. Are you referring to the circuit board at the back of the monitor or along the side of the housing? Before I get to taking things apart, if you could narrow my search down I'd appreciate it. hold on, I see 106. Got it thanks.
Thanks again, Jim
Logged
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« Reply #9 on: May 13, 2011, 02:22:34 AM »
Okay here's an update. I pulled both c106 and c109 caps and a tech at work tested them and c106 was bad. I replaced both with new. It still doesn't fire up but it now does a chirping noise which coensides with a blinking light on one of the circuit boards at the back of the monitor.
Does this sound familiar to anyone and where do I go from here?
Thanks, Jim
Logged
SilverFerret
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 453
« Reply #10 on: May 17, 2011, 01:43:48 AM »
Update: I replaced 3 more caps that looked as if they may have been replaced before from looking at the soldering job in the back. First attempt at turning the power on was unsuccesful, and on the second attempt it fired right up. I don't know if it was coincidence or what I did fixed it. Not sure but happy.
Thanks for your help, Jim
Logged
AnotherTech
Guest
« Reply #11 on: May 17, 2011, 02:21:10 AM »
I'm glad you got it going.  It sounds like you probably have a few more bad caps in there, but they aren't TOO bad yet. 

If you don't turn it off, it probably won't be a problem until you have the power go out or need to unplug it for some reason.  hissy fit 

We don't have any of those monitors anymore, and there's a lot I don't remember about them or I'd be more help with which ones to check.  I know a lot of the small ones went bad often, but they usually caused distortion, not total failure. 
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.082 seconds with 20 queries.