Welcome, Guest. Please login or register.
October 29, 2024, 10:25:50 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  IGT I-Game and Game King.
| | |-+  igt I game conversion to Game King Help!		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: igt I game conversion to Game King Help!  (Read 5240 times)
hedgee
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Posts: 36
« on: January 27, 2014, 12:42:08 AM »
Hello,  I have a IGT I game with a 3902 board.  I want to convert it to a game king.  I purchased some game king chips with a multi media board.  I am a little confused.  The chips are gme 1of 2 and 2 of 2.  Which is easy to understnad.  The problem I am having is the CG chips they are 1 of 4.  Where do they go?  There are empty sockets where the game chips go, but two of them are filled with a differnt type of chip.  Also do the two "slot cards" that are in the game still stay in?  Any help would be appreciated.  Thanks
Logged
Tilt
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 366
Offline Offline

Gender: Male
Posts: 724
« Reply #1 on: January 27, 2014, 01:17:15 AM »
GME1 and GME2 EPROMS go into sockets U13 & U36 respectively.  You should have two PXL EPROMS that need to be installed in U14 & U37 and then two CG EPROMS that go in U30 and U53.  Since you have 4 CG EPROMS I'm assuming they're mislabeled and two probably belong in the PXL sockets and the other two in the CGF sockets.  The question is which ones go where?  The PXL EPROMS are 8Mb and should be 27C801 or 27C080, and CG EPROMS are 4Mb and should be 27C4001 or 27C040s.  Read the numbers on the EPROM and see what you have. 

All the SIMM cards from your I-game software need to be removed. 
Logged
hedgee
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Posts: 36
« Reply #2 on: January 27, 2014, 10:24:48 PM »
I checked my chips again and you are correct. I do have the chips which you indicate. Which numbers go into each socket?
Logged
Tilt
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 366
Offline Offline

Gender: Male
Posts: 724
« Reply #3 on: January 27, 2014, 11:16:23 PM »
The two 4Mb EPROMS go in the CG sockets (U30 & U53) and the other two 8Mb PXL EPROMs and go in U14 & U37.  Assuming your chips are labeled CG1, CG2, CG3, & CG4 and CG1 and CG2 are the 8Mb chips I would put CG1 into PXL1 (U14) and CG2 into PXL2 (U37).  CG3 into CG1 (U30) and CG4 into CG2 (U53).  Then power it up and see if it boots.  If it does, then you can set it up.  If you get a gray pixelated screen, then you will have to swap chips around until they're in the right place and the machine boots.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #4 on: January 27, 2014, 11:29:28 PM »
See if this will help  Yellow  Base chip
                         Red Game chips
                         Blue PXL chips
                         White CG chips

* 2003-01-01 00.00.00-2.jpg (987.53 KB, 2048x1536 - viewed 457 times.)
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
hedgee
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Posts: 36
« Reply #5 on: January 28, 2014, 05:37:22 PM »
Thanks for the information and the picture.  I will try it this weekend  Do I need to use a clear chip at any time for this swap.  Also a K+ is order for your help! 
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #6 on: January 28, 2014, 06:59:43 PM »
There is every chance that you will have to clear and key the machine.  A key 040 or a key 22 will get the job done.  There may be others, but these are the two I use.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 20 queries.