Welcome, Guest. Please login or register.
November 23, 2024, 02:10:02 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally E-2000 Series, Reels Won't Stop spinning but shows no error codes 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally E-2000 Series, Reels Won't Stop spinning but shows no error codes  (Read 3253 times)
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« on: August 08, 2011, 01:15:04 AM »
I have a Bally E2000 that has me puzzled.   Scratch Head  It accepts and registers all coins. I have good tested reel readers and control board. Fuses and voltages are good too. You can play 1 to 3 coins, handle unlocks, reels spin, but don't want to stop, but I show no error codes. Only thing showing is my code 50 for opening the door to turn the machine on. I can reset the machine, but the same thing happens again? The handle does lock back out after reels were spun? Is this a problem with the kick and arm switches on the side of the reels? Last time I had an issue like this on a different machine the handle didn't lock out, but it was those switches.. Help
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #1 on: August 08, 2011, 01:56:08 AM »
I just had my E2243 do the same.
I replaced the kick switch and fixed it.
Check the adjustment first then ohm it while pulling the handle.
I would not close after the handle was pulled.

Paul
« Last Edit: December 11, 2011, 05:21:11 AM by proten » Logged
One step at a time.
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #2 on: August 08, 2011, 02:18:14 AM »
Quote from: proten on August 08, 2011, 01:56:08 AM
I just had my E2243 do the same.
I replaced the kick switch and fixed it.
Check the adjustment first then ohm it while pulling the handle.
I would no close after the handle was pulled.

Thanks Paul.. I will check it out tomorrow.

Gary
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #3 on: August 08, 2011, 11:00:09 AM »
you can test those switches in test #3, 


Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #4 on: August 09, 2011, 01:48:35 AM »
We'll it's fixed.. Come to find out both switches tested fine, but one of the cherry switches had a lot of play in the metal part that rides on the cam, and it was off the cam surface to one side. So after replacing that switch it's playing fine again.. Thanks for the help..   Karma + to Jim and Paul for there help...wave

Gary
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.096 seconds with 20 queries.