Welcome, Guest. Please login or register.
June 24, 2024, 10:56:59 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  OLED power Help		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: OLED power Help  (Read 2568 times)
Karaoke Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 273
Offline Offline

Gender: Male
Posts: 464
« on: December 05, 2011, 11:13:35 PM »
Hi,
On the oled button deck it is 24v with 2 wires going into the deck. Where would you plug the other end into? and is the square one in the molex the negative or positive?
Thanks, Pictures work best with me. Thank you
« Last Edit: December 06, 2011, 04:28:57 AM by Karaoke Mike » Logged


Karaoke Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 273
Offline Offline

Gender: Male
Posts: 464
« Reply #1 on: December 06, 2011, 04:26:26 AM »
ok, I found the programming manual and the power comes from j22 24v. Which one on the button deck is positive?  Silly Me!  of the 2. Thanks
Logged


channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #2 on: December 06, 2011, 12:59:38 PM »
A multimeter will tell you this.

Measure the voltage. If it shows a negative voltage then turn the leads around.
Logged
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: December 06, 2011, 01:59:18 PM »
Quote from: Karaoke Mike on December 05, 2011, 11:13:35 PM
Hi,
On the oled button deck it is 24v with 2 wires going into the deck. Where would you plug the other end into? and is the square one in the molex the negative or positive?
Thanks, Pictures work best with me. Thank you

Mike,
I don't know how Williams does it but IGT normally places the negative polarity on the latch side of a 2-pin Molex
and the wire there will be black or have a black stripe.

Is there not a 2-pin female Molex hanging around or hidden somewhere?
It should only go one way because there is usually a latch on one side of the Molex housing.
Also, does it look like any of these ?

Click on any photo to enlarge if needed...>>>

* 2-pin Molex housing with latch 001.jpg (90.53 KB, 836x652 - viewed 259 times.)

* 2-pin AMP housings.png (129.29 KB, 291x231 - viewed 456 times.)
« Last Edit: December 06, 2011, 02:32:00 PM by stayouttadabunker » Logged
Karaoke Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 273
Offline Offline

Gender: Male
Posts: 464
« Reply #4 on: December 06, 2011, 02:38:58 PM »
The one with the connector side using the mutimeter said that it was negative and the other one is positive. I just want to be 100% sure, I don't want a poof.
Thank you for the replies. K+

* IMG_1067a.JPG (586.57 KB, 1296x968 - viewed 257 times.)
Logged


Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.105 seconds with 20 queries.