Universal Ultra Slot Machine

[uniman]

Sounds like the board is not seated all the way. With power off, pull it out and check the pins in back, make sure all is straight, reinsert board and seat it. By seat it I mean to make sure it is plugged in solid to the motherboard. Do a RAM clear while powering up.

[pistachio62]

Finally after about a week of playing, the board is running again, and the error codes are yet again the same, 19, 31, and 50.  19 you said will go away after it is played, and 50 is door ajar, so that leaves 31 which is the coin hopper, I will try the tooth pick thing and see where that gets me, and hopefully report back...

[pistachio62]

okay, so the toothpick thing did nothing at all, but now when the door is open, it reads a 50 and a 0 further down on the win meter display, and when the door is closed it reads a 51 with a 1 where the 0 was previously, its also still reading a 19, which shouldn't be an issue, and then the 31... which seems to still be the major issue, is there some way to bypass the hopper or what is my next move?

[uniman]

I don't think you can bypass the hopper.

Lets assume your main mpu board is good and has a good connection.
That leaves the hopper as the possible problem. Need to check the optic.
Remove the hopper and take off the plastic bowl. It unsnaps.
See first pic below. Need to remove the black plastic case that holds the optic. Three screws. There might be a shim at top and bottom when you remove it. Mine in the pic is a dollar hopper, can't remember if quarter hoppers have shims too. Don't lose the shims, remember where they go.
Then unscrew the silver metal cover on the back of the black plastic case. One screw. Unplug the optic and then pull it out.

To be continued....

[uniman]

Look at the optic and you will see the two lenses on one side. Turn the optic and there is a little green LED on the side.
Plug the optic back in and put the hopper back in the machine.
Postion the optic so the lenses are pointing into the open air. (In my pic they are pointing down, LED pointing towards me)
Turn on the machine and see if the green LED is lit. (See 1st pic)
Put your finger over the optic lenses and see if the green LED goes out.
Let me know your findings,

Jim


(Note: this topic marked as sticky by request. Thanks jbshocks!)

[zuixit]

Good Evening to all members online.
I wanted to search www then remembered that on NLG you can find almost anything for slots.
I'm in need of a few slot manuals;if anyone can help me please, it would be power.
Bally slot 5000
Bally Video Poker V5500
Universal Slot-3,5 or 7 series.

Have a great evening or day.

Thank You
Zuixit

[milton yancey]

I need a key for a Universal Slot Machine. It is a CONTEST CRANKY NUMBERS 019191, u4-22,,,,ndt 1378157
tHANKS
miltonyancey@yahoo.com

[uniman]

Milton,
This is not the Want To Buy section of NLG. Only post here if you have an Universal Ultra Slot problem.

Please post your WTB in this section; http://newlifegames.net/nlg/index.php?board=137.0    You will need to start a New Topic.

I believe Cranky Condor is a skill stop slot machine, not many skill stop people here.

Jim