Welcome, Guest. Please login or register.
September 28, 2024, 03:20:26 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  bally e-2000 hopper not working		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: bally e-2000 hopper not working  (Read 2329 times)
pindork1
Guest
« on: April 10, 2012, 04:09:24 AM »
well i picked up two machines the first one has me stumped so i have moved onto the second machine. all works but the hopper works intermittently. i pulled the i/o board out of the first machine and placed it in the second machine. the hopper works fine with the i/o board out of the first machine. i have looked at the schematics for the i/o board but i cant seem to find the transistor that turns the hopper on? is it a transistor or a chip? what turns the hopper on? or what should i look at on the i/o. thanks!!!
mike
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #1 on: April 10, 2012, 05:54:24 PM »
 You've Got Mail

Gary
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
pindork1
Guest
« Reply #2 on: April 10, 2012, 06:30:49 PM »
thank you gary!! the trouble im having is i cant find what controls the hopper? the schematics in that e-mail has no listing for the hopper motor on the i/o board. thanks again for the help!! Help
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #3 on: April 10, 2012, 08:36:13 PM »
If you have an E2000 there should be a small blue or clear relay mounted right behind the hoppers plug. If it was a 1000 series then there would be a relay board in the same place.
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
pindork1
Guest
« Reply #4 on: April 11, 2012, 12:03:20 AM »
i do see the hopper relay board. i have a tested i/o out of another game and the machine functions fine with that i/o board. i reflowed all the edge pins and the problem follows the i/o board. i cant seem to find anything on the i/o schematic that shows a path to the hopper? thanks again for the help!!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.084 seconds with 20 queries.